7.- 역학

역학은 자연에 존재하는 요소에 영향을 미치는 물리적 현상을 연구하는 과학 분야입니다. 역학이라고 불리지 만 실제로는 현대 물리학의 두 가지 기본 기둥 인 고전 역학과 양자 역학을 모두 포함합니다.

고전 역학은 자유도가 유한하거나 무한한 수 (연속 매체)를 갖는 시스템뿐만 아니라 단단한 고체에 대한 연구를 다루며, 양자 역학은 소규모 또는 저에너지 시스템을 연구합니다.

모든 실험 과학에서와 마찬가지로 신체의 모든 기계적 연구에는 물리적 및 수학적 관점에서 분석 과정과 실험이 포함됩니다. 그러나 다른 과학 분야와 달리 역학에서는 실제 시스템에서 해석되는 이론적 행동을 연구하는 것이 그렇게 복잡하지 않습니다.

Newton, Lagrange, Hamilton 또는 Schrödinger와 같은 여러 과학자의 기여 덕분에 몇 가지 기본 원리 또는 역학 법칙을 설정할 수 있습니다.

뉴턴의 법칙.
운동량 보존 원리.
에너지 절약 원리.
각 또는 운동 모멘트의 보존 원리와 회전 역학의 기본 방정식.

연구 분야의 범위를 고려할 때 가장 대표적인 것을 언급 할 가치가 있습니다.

공학.
공전.
동적.
유체 역학.
열역학 및 열 전달.
재료의 과학, 탄성 및 저항.
수치 해석 (유한 요소법).

산업의 끊임없는 진화로 인해 기계 공학, 자동차 및 자동차 공학, 구조 계산, 기계 개발, 설치 및 유지 보수 분야가 현재 가장 큰 발전을 이루고있는 분야입니다.

제품보기

역학 장비

Showing 109-144 of 175 item(s)

COMPREHENSIVE GASOLINE TEST AND DIAGNOSTIC BENCH FOR COMBUSTION ENGINES WITH FAULT SIMULATION - TBM/G

TBM/G

Available

9.9.- 내부 연소 엔진

TBM/G

고장 시뮬레이션이 포함된 종합 가솔린 엔진 테스트 및 진단 벤치

The Comprehensive Gasoline Test and Diagnostic Bench for Combustion Engines with Fault Simulation, "TBM/G", is an advanced unit designed by EDIBON to conduct exhaustive tests and precise diagnostics on gasoline engines. Ideal for engineers and...

COMPREHENSIVE DIESEL ENGINE TEST AND DIAGNOSTIC BENCH - TBM/D

TBM/D

Available

9.9.- 내부 연소 엔진

TBM/D

디젤 엔진 종합 테스트 및 진단 벤치

The Comprehensive Diesel Test and Diagnostic Bench for Internal Combustion Engines, "TBM/D", is an advanced unit designed by EDIBON to conduct exhaustive tests and precise diagnostics on diesel engines. Ideal for engineers and technicians, this...

COMPREHENSIVE TESTING AND DIAGNOSIS BENCH FOR HYBRID ENGINE WITH BRAKING AND DIAGNOSTIC SOFTWARE - TBM/H

TBM/H

Available

9.9.- 내부 연소 엔진

TBM/H

브레이크 및 진단 소프트웨어를 갖춘 하이브리드 엔진 종합 테스트 및 진단 벤치

The Comprehensive Testing and Diagnosis Unit for Hybrid Engine with Braking and Diagnostic Software, "TBM/H", designed by EDIBON, is an advanced unit that enables an in-depth analysis of hybrid engine performance, providing a key solution for...

COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG

TBMC-CG

Available

7.2.3.- 엔진

TBMC-CG

배기가스 열량계, 컴퓨터(PC) 제어

The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...

TBMC-AGE

Available

7.2.3.- 엔진

TBMC-AGE

배기가스 분석기

Measurement of the volumetric concentrations according to the procedure of nondispersiva infrared absorption.Engines selection: gasoline, butane, propane, 2/4 times, 1/2/3/4/5/6/8/12 cylinders.Fast warm-up of the measure cell.Auto-check...

TBMC-AGE/NOx

Available

7.2.3.- 엔진

TBMC-AGE/NOx

배기 가스 분석기 (NOx)

COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC

EFOC

Available

7.3.1.- 광탄성 및 변형률 측정

EFOC

Computer Controlled Photoelasticity Unit

Unit for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the introduction and study of photoelasticity: optical...

Available

7.3.1.- 광탄성 및 변형률 측정

EFO

Photoelasticity Unit

Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...

EFOV

Available

7.3.1.- 광탄성 및 변형률 측정

EFOV

Computer Controlled Photoelasticity Unit with Artificial Vision System

MEGE

Available

7.3.1.- 광탄성 및 변형률 측정

MEGE

Strain Gauge Training Unit

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...

UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE

MFGE

Available

7.3.1.- 광탄성 및 변형률 측정

MFGE

Unit for Determining the Gauge Factor of Strain Gauges

The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...

Available

7.3.2.1.- 기계적 테스트

EEF

Fatigue Testing Unit

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- 기계적 테스트

EEICI

Charpy and Izod Impact Testing Unit

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

MEBM

MTTU

Available

7.3.2.1.- 기계적 테스트

MTTU

Tensile Tester Unit

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- 열 및 음향 테스트

TIAC

Computer Controlled Acoustic Impedance Tube/Acoustic Insulation Test Unit

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC

TDRC

Available

7.3.2.2.- 열 및 음향 테스트

TDRC

장치 소음 제어 시연 장비, 컴퓨터 제어

The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF BUILDING AND INSULATING MATERIALS UNIT - TCMC

TCMC

Available

7.3.2.2.- 열 및 음향 테스트

TCMC

Computer Controlled Thermal Conductivity of Building and Insulating Materials Unit

The Computer Controlled Thermal Conductivity of Building and Insulating Materials Unit, "TCMC", is a unit employed to measure thermal conductivity of low-conductivity materials, such as insulating materials.This unit is a calibrated instrument...

PRACTICAL CASTING KIT: MODELING AND SAND CASTING OF SOLID PARTS - MCAM

MCAM

Available

7.3.3.1.- 주조

MCAM

실습 주조 키트: 고형 부품의 모래 주형 및 주조

The Practical Casting Kit: Modeling and Sand Casting of Solid Parts, "MCAM", developed by EDIBON, is an essential educational tool for teaching the fundamentals of casting. This kit allows students to develop practical skills in molding and...

PRACTICAL CASTING KIT: MODELING AND SAND CASTING OF HOLLOW PARTS - MCLA

MCLA

Available

7.3.3.1.- 주조

MCLA

실습 주조 키트: 중공 부품의 모래 주형 및 주조

The Practical Casting Kit: Modeling and Sand Casting of Hollow Parts, "MCLA", developed by EDIBON, is an essential educational tool for teaching the fundamentals of casting. This kit allows students to develop practical skills in molding and...

PRACTICAL CASTING KIT: CENTRIFUGAL CASTING - MCEN

MCEN

Available

7.3.3.1.- 주조

MCEN

실습 주조 키트: 원심 주조

The Practical Casting Kit: Centrifugal Casting, "MCEN", designed by EDIBON, is an essential educational unit for teaching the fundamentals of centrifugal casting. This unit enables students to develop practical skills in centrifugal casting...

CUTAWAY MODELS OF TRANSMISSION OF MOTION UNITS - CMTM

CMTM

Available

7.4.1.- 섹션 모델

CMTM

Cutaway Models of Transmission of Motion Units

Mechanical transmission is any device that propagates power between two or more elements of a machine. The most common mechanical transmissions are cables, chains, belts, gears, pulleys, friction wheels, friction discs, camshafts,...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

WGCM

Unit to Study a Worm Gear Cutaway Model

액세서리 CMTM

The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

MGCM

Unit to Study a Mitre Gear Cutaway Model

액세서리 CMTM

The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

SGCM

Unit to Study a Spur Gear Cutaway Model

액세서리 CMTM

The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

액세서리 CMTM

Available

7.4.1.- 섹션 모델

SGCM/2

Unit to Study a Two-Stage Spur Gear Cutaway Model

액세서리 CMTM

The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

PGCM

Unit to Study a Planetary Gear Cutaway Model

액세서리 CMTM

The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...

추가 정보는 미국에 문의하십시오