14.1.- 생체 역학

생체 역학은 인체의 움직임을 포함하여 생물체의 움직임 역학을 연구합니다. 이 연구는 직장이나 스포츠 활동과 같은 일상 생활의 가장 단순한 움직임에서 심장과 같은 일부 내부 장기의 움직임에 이르기까지 다양합니다. 인체 역학을 연구하기 위해 생체 역학은 역학 원리와 해부학 및 생리학 지식을 적용하여 새로운 진단 및 치료 기기를 설계하고 더 나은 보철 및 임플란트 설계를 개발할 수 있습니다.

현재 Biomechanics는 관절과 근육 조합의 다양한 움직임을 분석합니다. 이러한 분석을 통해 인체에 가해지는 하중과 스트레스를 연구 할 수 있습니다. 인간 운동학에 대한 지식은 부상 치료 및 후속 재활, 움직임의 유연성을 허용하는 보철 설계, 신체 활동의 성능을 높이기위한 새로운 스포츠 기술 검색 또는 신체의 악화를 방지합니다. 직장과 집에서 활동할 때. 이 모든 지식은 생체 역학의 여러 영역으로 나눌 수 있습니다 : 의료 생체 역학, 스포츠 생체 역학 및 직업 생체 역학. Biomechanics의 또 다른 응용 분야는 로봇 응용 프로그램의 설계입니다. 로봇 팔의 움직임이나 전기 기계 운동 시스템을 통해 움직이는 일부의 능력은 생명체의 역학에 기반합니다.

유기체의 기계적 행동에 대한 지속적인 연구는 생체 역학의 응용을 이끌어 실제 유기체의 정상적인 기능을 시뮬레이션하고 자극에 반응 할 수있는 생체 공학 보철물과 인공 유기체를 개발하고 있습니다. 또한 외골격 기술의 개선은 거동이 불편한 사람들의 이동성을 높이고 고부하 활동을 수행 할 때 신체 능력을 향상시킬 것입니다.

제품보기

생체 역학 UNITS

Showing 73-108 of 109 item(s)

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFBS

Unit for Studying Forces in a Simple Bar Structure

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFCS1

Unit for studying Forces in Different Single Plane Trusses

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFCS2

Unit for studying Forces in an Overdeterminate Truss

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFCS3

Unit for studying Deformation of Trusses

The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFL

Two Hinged Arch Unit

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MPO

Portal Frame Unit

The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

STH

Stress Hypotheses Unit

The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MEPE

Simple Stability Problems Study Unit

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MDLE

Unit for studying Methods to Determine the Elastic Line

The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...

UNIT TO STUDY STRESS ON A MEMBRANE - SSM

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

SSM

Unit to Study Stress on a Membrane

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MVV

Unsymmetrical Cantilever Unit

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...

Available

7.3.2.1.- 기계적 테스트

MDB

Deflection of Curved Bars Unit

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...

Available

7.3.2.1.- 기계적 테스트

MFV

Beam Deflection Unit

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

MFLT

Available

7.3.2.1.- 기계적 테스트

MFLT

Strut Buckling Unit

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

Available

7.3.2.1.- 기계적 테스트

MUP

Universal Buckling Unit

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- 기계적 테스트

MMF

Shear Force and Bending Momentum Unit

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...

COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC

EFOC

Available

7.3.1.- 광탄성 및 변형률 측정

EFOC

Computer Controlled Photoelasticity Unit

Unit for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the introduction and study of photoelasticity: optical...

Available

7.3.1.- 광탄성 및 변형률 측정

EFO

Photoelasticity Unit

Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...

EFOV

Available

7.3.1.- 광탄성 및 변형률 측정

EFOV

Computer Controlled Photoelasticity Unit with Artificial Vision System

UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE

MFGE

Available

7.3.1.- 광탄성 및 변형률 측정

MFGE

Unit for Determining the Gauge Factor of Strain Gauges

The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...

MEGE

Available

7.3.1.- 광탄성 및 변형률 측정

MEGE

Strain Gauge Training Unit

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...

PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD

Available

7.3.1.- 광탄성 및 변형률 측정

PSD

Photoelastic Stress Demonstration Unit

The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- 기계적 테스트

EEU/20KN

Universal Material Testing Unit

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...

EEDB

Available

7.3.2.1.- 기계적 테스트

EEDB

Brinell Hardness Testing Unit

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- 기계적 테스트

EBVR

Brinell, Vickers & Rockwell Hardness Testing Unit

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...

EEFCR

Available

7.3.2.1.- 기계적 테스트

EEFCR

Creep Testing Unit

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- 기계적 테스트

EEFC

Computer Controlled Fatigue Testing Unit

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.3.2.1.- 기계적 테스트

EEF

Fatigue Testing Unit

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- 기계적 테스트

EEICI

Charpy and Izod Impact Testing Unit

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

MEBM

Available

7.3.2.1.- 기계적 테스트

MEBM

Euler Buckling Modes Unit

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.3.2.1.- 기계적 테스트

MTP

Torsion and Bend Unit

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...

Available

7.3.2.1.- 기계적 테스트

MTB

Torsion Unit

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...

Available

7.3.2.1.- 기계적 테스트

MTT

Torsion Test Unit (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...

MTTU

Available

7.3.2.1.- 기계적 테스트

MTTU

Tensile Tester Unit

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- 열 및 음향 테스트

TIAC

Computer Controlled Acoustic Impedance Tube/Acoustic Insulation Test Unit

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC

TDRC

Available

7.3.2.2.- 열 및 음향 테스트

TDRC

Computer Controlled Noise Control Demonstration Unit

The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...

추가 정보는 미국에 문의하십시오