최고 판매자
Showing 397-432 of 937 item(s)
12 24 36
COIL VESSEL HEAT EXCHANGER FOR TICC - TIVS
Available
9.7.- 열교환 기
TIVS
TICC용 코일이 있는 재킷 용기 열교환기
액세서리 TICC
The Coil Vessel Heat Exchanger for TICC, "TIVS", designed by EDIBON, provides a comprehensive environment for the detailed study of heat transfer between two non-mixing fluids. In this unit, hot water circulates through a coil, transferring heat...
뷰 유닛
PLATE HEAT EXCHANGER FOR TICC - TIPL
Available
9.7.- 열교환 기
TIPL
TICC용 플레이트 열교환기
액세서리 TICC
The Plate Heat Exchanger for TICC, "TIPL", designed by EDIBON, allows the study of heat transfer between hot and cold water flowing through alternate channels formed between parallel plates. This unit enables the analysis of how heat transfer...
뷰 유닛
EXTENDED CONCENTRIC TUBE HEAT EXCHANGER FOR TICC - TITCA
Available
9.7.- 열교환 기
TITCA
TICC용 확장 동축 튜브 열교환기
액세서리 TICC
The Expanded Concentric Tube Heat Exchanger for TICC, "TITCA", designed by EDIBON, allows for detailed study of heat transfer between two fluids: the hot water flowing through an inner tube and the cold water circulating in the annular space...
뷰 유닛
EXTENDED PLATE HEAT EXCHANGER FOR TICC - TIPLA
Available
9.7.- 열교환 기
TIPLA
TICC용 확장 플레이트 열교환기
액세서리 TICC
The Expanded Plate Heat Exchanger for TICC, "TIPLA", designed by EDIBON, enables detailed study of heat transfer between hot and cold water flowing through alternate channels formed between parallel plates.This unit facilitates analysis of heat...
뷰 유닛
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- 기계적 테스트
MTP
Torsion and Bend Unit
The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...
뷰 유닛
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- 기계적 테스트
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
뷰 유닛
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- 기계적 테스트
MTB
Torsion Unit
The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...
뷰 유닛
TORSIONAL OSCILLATIONS UNIT - MOT
  • MOT
Available
7.1.4.- 진동 및 진동
MOT
Torsional Oscillations Unit
The Torsional Oscillations Unit, "MOT", designed by EDIBON, basically consists of a rigid frame that have some fasteners which enable to situate its different elements. It also has a set of helicoidal springs to simulate long flexible shafts, and...
뷰 유닛
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- 센서 및 전자 기기
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
뷰 유닛
TRANSMISSIONS EXPERIMENTS - MECA3
Available
7.1.1.- 역학 기본 키트
MECA3
Transmissions Experiments
액세서리 LIMEBA
Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.
뷰 유닛
TRANSPARENT VORTEX FLOW METER - FME30
  • FME30
Available
8.1.2.- 측정
FME30
Transparent Vortex Flow Meter
The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...
뷰 유닛
TRIBOLOGY MODULAR UNIT - MEMT
  • MEMT
Available
7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)
MEMT
Tribology Modular Unit
The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...
뷰 유닛
METAL TO METAL HEAT TRANSFER MODULE FOR TSTCC - TXC/MM
Available
9.6.- 열전달
TXC/MM
TSTCC용 (금속 대 금속) 열전달 장비
액세서리 TSTCC
The Metal to Metal Heat Transfer Unit for TSTCC, "TXC/MM", enables the study of heat transfer in different metallic materials arranged in series.Bench-top unit designed to study of the heat transfer of different metallic materials situated in series.
뷰 유닛
THREE AXES HEAT TRANSFER MODULE FOR TSTCC - TXC/TE
Available
9.6.- 열전달
TXC/TE
TSTCC용 3축 열전달 장비
액세서리 TSTCC
The Three-Axis Heat Transfer Unit for TSTCC, "TXC/TE", enables the study of heat transfer by analyzing its direction along the three axes.Bench-top unit designed to carry out heat transfer experiments and exercises studying the direction in three...
뷰 유닛
INSULATING MATERIAL HEAT TRANSFER MODULE FOR TSTCC - TXC/TI
Available
9.6.- 열전달
TXC/TI
TSTCC용 단열재 열전달 장비
액세서리 TSTCC
The Insulating Material Heat Transfer Unit for TSTCC, "TXC/TI", enables the study of thermal conductivity resistance in different insulating materials.Bench-top unit to study the thermal conduction resistance of different thermal insulating...
뷰 유닛
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFL
Two Hinged Arch Unit
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
뷰 유닛
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
뷰 유닛
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFCS3
Unit for studying Deformation of Trusses
The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...
뷰 유닛
UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2
  • MEMB2
Available
7.1.3.- 통계 및 역학
MEMB2
Unit for studying Equilibrium of Moments on a Two Arm Lever
The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", has been designed by EDIBON to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme...
뷰 유닛
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFPG
Unit for studying Forces in a Jib Crane
The Unit for studying Forces in a Jib Crane, "MFPG", has been designed by EDIBON to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in...
뷰 유닛
UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS
  • MFBS
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFBS
Unit for Studying Forces in a Simple Bar Structure
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
뷰 유닛
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFCS2
Unit for studying Forces in an Overdeterminate Truss
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...
뷰 유닛
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFCS1
Unit for studying Forces in Different Single Plane Trusses
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...
뷰 유닛
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- 통계 및 역학
MELH
Unit for studying Hooke´s Law
The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...
뷰 유닛
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MDLE
Unit for studying Methods to Determine the Elastic Line
The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...
뷰 유닛
UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM
Available
7.4.1.- 섹션 모델
CGCM
Unit to Study a Control Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Control Gear Cutaway Model, "CGCM ", provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in...
뷰 유닛
UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM
Available
7.4.1.- 섹션 모델
MGCM
Unit to Study a Mitre Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Mitre Gear Cutaway Model, "MGCM", designed by EDIBON, allows for the study of this type of transmission, which uses bevel gears to transmit motion between two perpendicular shafts.Due to their ability to change the direction of...
뷰 유닛
UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM
Available
7.4.1.- 섹션 모델
DCCM
Unit to Study a Multiple-Disc Clutch Cutaway Model
액세서리 CMTM
The Unit to Study a Multiple-Disc Clutch Cutaway Model, "DCCM", designed by EDIBON, allows for the study of this Multiple-disk clutch system, used to transmit higher torques in mechanical systems.This type of clutch is widely used in chain tractor...
뷰 유닛
UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM
Available
7.4.1.- 섹션 모델
PGCM
Unit to Study a Planetary Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Planetary Gear Cutaway Model, "PGCM", designed by EDIBON, allows for the study of one or more external or planet gears that revolves about a central or sun gear.Planetary gears are widely used in vehicle gearboxes, speed...
뷰 유닛
UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM
Available
7.4.1.- 섹션 모델
SGCM
Unit to Study a Spur Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Spur Gear Cutaway Model, "SGCM, designed by EDIBON, It is a mitre gear.l power transmission systems.It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two...
뷰 유닛
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
Available
7.4.1.- 섹션 모델
SGCM/2
Unit to Study a Two-Stage Spur Gear Cutaway Model
액세서리 CMTM
The Sectioned Model of a Spur Gear Transmission, "SGCM/2", designed by EDIBON, allows for the study of this type of transmission, which is the simplest and most widely used in mechanical systems for motion and power transmission.These systems are...
뷰 유닛
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- 섹션 모델
WGCM
Unit to Study a Worm Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Worm Gear Cutaway Model, "WGCM", designed by EDIBON, allows for the study of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and mechanisms that require...
뷰 유닛
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- 통계 및 역학
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
뷰 유닛
정보 요청