2.- 전자

전자 공학은 전자의 행동에 초점을 맞춘 물리학의 한 분야입니다. 공학에서 전자 공학은 전자 회로를 연구하고 개발하는 부분입니다. >이를 통해 순환하는 전자가 애플리케이션 사양에서 요구하는 동작을 갖도록합니다.

더보기

전자 공학 전원 공급 장치로 매우 제한된 응용 분야에서 사회에 큰 영향을 미치기까지 20 세기 동안 가장 발전된 분야 중 하나였습니다. 이러한 큰 영향을 이해하기위한 주요 전자 응용 프로그램의 몇 가지 예는 압력 수준, 같은 모든 종류의 물리량에 대한 센서 및 미터입니다. 유량 수준 온도 측정, 전자 증폭기 필터 사용, 통합 회로 개발, 마이크로 프로세서 및 개인용 컴퓨터, MOSFET, 같은 다양한 기술의 트랜지스터 개발 JFET, BJT, IGBT 등.

전자 애플리케이션은 거의 끝이 없으며 매년 새로운 기여가 개선되고 추가됩니다. 전자 회로의 적용에 따라 이진 여부에 따라 아날로그 전자 디지털 전자 그룹이 구분됩니다. > 또는 아날로그 신호가 사용됩니다. 전력 전자 장치는 높은 전기 전류 여부에 따라 다릅니다. 및 전기 전압이 사용되며, 물리적 양 전자 측정에 사용되는지 여부에 따라 전자 기기, 등.

전자 부품의 미래 전자 부품 소형화에 초점을 맞춰 효율성 향상시킵니다. 속도. 이 작업에서 그래 핀 또는 실리 신과 같은 혁신적인 신소재의 발견이 매우 중요합니다.

제품보기
관련 자료
전자 SUBCATEGORIES

2.1.- 전원 공급 장치, 측정 장비 및 액세서리

전자 실험실 장비는 실제 전자 장치 세션에서 실험을 수행하는 데 필요한 장비 세트입니다. 장비의 특성은 장비 할 실험실의 이론적 수준, 기술 기관, 대학 또는 기업의 연구 개발 부서에 따라 달라집니다.전자 실험실에서 사용되는 가장 일반적인 장치는 한편으로는 모델에 따라 전류계, 전압계, 커패시턴스 미터, 저항 측정기 및 기타 많은 측정. 반면 전자 실험실에는 오실로스코프 및 스펙트럼 분석기와 같은 전자 장치를 사용하여 신호를 분석 할 수있는 장비가 있습니다. 마지막으로, 전자 실험실에는 전원 공급 장치에서 생성 된 것과 같은...
참조

2.2.- 회로 조립 용 키트

컴퓨터의 전자 개발 단계는 필요한 사양을 충족하는 제품을 얻기 위해 수행되는 일련의 단계입니다.전자 장치 개발의 가장 특징적인 단계는 장비 사양의 정의, 장치에 필요한 다양한 전자 회로의 설계 (전원 회로, 제어 회로, 전원 회로, 필터 회로)입니다. 신호, 발진기 회로, 전력 및 신호 회로 사이의 절연 회로, 아날로그 신호 컨디셔닝 회로, 증폭기 회로, 인코더 또는 디코더 회로 등), 각 회로가 전달할 구성 요소의 특성 계산, 장치의 전자 회로 작동 시뮬레이션, 다른 회로의 개별 테스트, 제품 프로토 타입 개발, 마지막으로...
참조

2.3.- 이론적-실용적 기초

전자 공학의 기본은 가장 일반적인 전자 회로의 일반적인 작동과 구성 요소보다 전자 구성 요소의 개별 기능을 분석하고 이해할 수있는 견고한 기초를 학생에게 제공하기위한 지식의 몸입니다.복잡한 전자 시스템의 후속 설계 및 개발에 필요한 단계는 전자와 같은 전문 분야에서 좋은 이론적 기반을 확보하는 것입니다. 전자는 또한 공학의 한 분야이기 때문에 대부분의 이론적 개념은 직접적인 실용적 응용을 가지고 있으며, 이는 관련 사례가있는 경우 전자 공학 학생의 개념 동화를 크게 용이하게합니다.전자 회로의 기초는 전자 회로 분석 (옴의...
참조

2.4.- 산업 전자

산업 전자공학은 산업 등급 전자 시스템, 즉 산업에서 사용되는 전자 장비에 초점을 맞춘 전자공학의 한 분야입니다.산업 전자공학의 가장 중요한 분야 중 하나는 전력 전자공학으로, 높은 수준의 전압과 전류를 제어하고 조절하는 전자 애플리케이션의 개발을 다룹니다. 모든 공학 분야와 마찬가지로 산업 전자공학의 발전은 이 분야의 과학적 진보로 특징지어집니다. 전력 전자 분야에서 가장 중요한 발전은 SCR 정류기, GTO 사이리스터, 그리고 무엇보다도 IGBT 트랜지스터와 같은 반도체 구성 요소입니다. 중앙 제어 회로와 결합 된 이러한...
참조

2.5.- 자동차 전자

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
참조
전자 UNITS
Showing 73-108 of 122 item(s)
PRESSURE TEST MODULE - BS3
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS3
압력 실험 모듈
액세서리 BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
FLOW TEST MODULE - BS4
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS4
유량 실험 모듈
액세서리 BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
OVENS TEST MODULE - BS5
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS5
오븐 실험 모듈
액세서리 BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
LIQUID LEVEL TEST MODULE - BS6
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS6
액체 레벨 실험 모듈
액세서리 BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
TACHOMETER TEST MODULE - BS7
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS7
타코미터 실험 모듈
액세서리 BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
PROXIMITY TEST MODULE - BS8
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS8
근접 시험 모듈
액세서리 BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
PNEUMATIC TEST MODULE - BS9
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS9
공압 시험 모듈
액세서리 BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
LIGHT TEST MODULE - BS10
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS10
조명 실험 모듈
액세서리 BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- 센서 및 전자 기기
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B
  • RYC/B
Available
6.1.1.1.- 이론적 실용적 기초
RYC/B
Basic Teaching Unit for the Study of Regulation and Control
The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- 이론적-실용적 기초
RYC/T
Computer Controlled Modular Control and Regulation Unit
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- 이론적 실용적 기초
RYC-BB
Ball and Beam Module
액세서리 RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- 이론적 실용적 기초
RYC-SM
DC Servo Motor Module
액세서리 RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- 이론적 실용적 기초
RYC-TAR
Air Flow Temperature Control Module
액세서리 RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- 이론적 실용적 기초
RYC-PI
Inverted Pendulum Control Module
액세서리 RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- 이론적 실용적 기초
RYC-CLM
Magnetic Levitation Control Module
액세서리 RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- 이론적 실용적 기초
RYC-TAG
Water Flow Temperature Control Module
액세서리 RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- 이론적 실용적 기초
RYC-TE
Temperature Control Module
액세서리 RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- 이론적 실용적 기초
RYC-P
Pressure Control Module
액세서리 RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- 이론적 실용적 기초
RYC-N
Level Control Module
액세서리 RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- 이론적 실용적 기초
RYC-C
Flow Rate Control Module
액세서리 RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- 이론적 실용적 기초
RYC-I
Luminosity Control Module
액세서리 RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- 이론적 실용적 기초
RYC-pH
pH Control Module
액세서리 RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- 이론적 실용적 기초
RYC-CP
Position Control Module
액세서리 RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI
  • AE-SMI
Available
2.4.2.- 전기 서보 모터
AE-SMI
Servomotor Industrial Application
The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...
BRUSHLESS MOTOR INDUSTRIAL APPLICATION - AE-BMI
  • AE-BMI
Available
2.4.2.- 전기 서보 모터
AE-BMI
Brushless Motor Industrial Application
The Brushless Motor Industrial Application, "AE-BMI", is designed to perform the most common control used in the industry: the position control. The "AE-BMI" application allows the student to configure up to four positions with all the parameters...
SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB
  • SERIN/CCB
Available
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CCB
Servosystems Basic Unit for DC Motors
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- 전력 전자 및 산업 전자
AEL-SERIN/CA-1KW
1kW 규모의 산업용 교류 서보 모터 응용
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
POWER ELECTRONICS APPLICATION, WITH SCADA - AEL-PWEC
  • AEL-PWEC
Available
5.1.3.2.- 전력 전송
AEL-PWEC
전력전자학 응용, SCADA 포함
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
정보 요청