14.- 의용 생체 공학

생물 의학 공학은 생물학 및 의학 분야에서 공학 지식의 응용을 연구합니다. 전자 제어 및 계측 시스템의 조합과 수학적 알고리즘 및 물리 및 화학적 원리의 적용을 통해 Biomedical Engineering은 임상 문제 해결을위한 새로운 기술과 장치를 조사하고 개발할 수 있습니다. 이 분야는 진단 요소 및 의료 소프트웨어 도구 설계에서 심장 또는 신경계 연구를위한 생리 학적 분석에 이르기까지 다양합니다.

더보기

생물 의학 공학은 과학 및 기술 발전과 함께 수년에 걸쳐 발전해 왔습니다. 오늘날 활력 징후 모니터링 시스템 또는 진단 장치와 같은 장치는 의료 업무를 용이하게합니다. 엑스레이, 초음파, 자기 공명 영상과 같은 영상 분석 방법의 발달로 신체를 명확하고 빠르게 연구 할 수 있습니다. 또한 원격 의료 및 병원 관리 소프트웨어가 사용됩니다.

오늘날의 사회에는 빠르고 효율적인 의료 솔루션이 필요하기 때문에 생물 의학 공학의 미래는 긴 발전 경로를 가지고 있습니다. 매일 사용되는 전자 장치를 사용하면 생체 신호 값에 따라 원격 환자 모니터링이 가능하여 건강 문제 이전에 증상을 분석하고 가능한 문제를 예방할 수 있습니다. 생물 의학 공학의 또 다른 추세는 실험실 도구의 단순화입니다. LOC (Lab On a Chip)와 같은 시스템은 단일 칩에 실험실 기능을 통합합니다. 새로운 로봇 수술 기술, 인공 조직 및 재생 조직 제조를위한 새로운 유기 재료 또는 인공 장기의 3D 프린팅을 통해 미래의 의료 요구를 충족 할 수 있습니다.

제품보기
관련 자료
의용 생체 공학 하위 카테고리

14.1.- 생체 역학

생체 역학은 인체의 움직임을 포함하여 생물체의 움직임 역학을 연구합니다. 이 연구는 직장이나 스포츠 활동과 같은 일상 생활의 가장 단순한 움직임에서 심장과 같은 일부 내부 장기의 움직임에 이르기까지 다양합니다. 인체 역학을 연구하기 위해 생체 역학은 역학 원리와 해부학 및 생리학 지식을 적용하여 새로운 진단 및 치료 기기를 설계하고 더 나은 보철 및 임플란트 설계를 개발할 수 있습니다.현재 Biomechanics는 관절과 근육 조합의 다양한 움직임을 분석합니다. 이러한 분석을 통해 인체에 가해지는 하중과 스트레스를 연구 할 수...
참조

14.2.- 생체 전자

생물 의학 공학은 생물학 및 의학 분야에서 공학 지식의 응용을 연구합니다. 이 공학의 가장 관련성이 높은 분야 중 하나는 의료 기기 개발에 전자의 개념이 적용되는 Biomedical Electronics입니다.오늘날 의학에서 개발 된 많은 프로세스는 특정 요구 사항을 충족하기 위해 전자 공학의 지원이 필요합니다. 저항기, 코일 및 커패시터와 같은 기본 전자 요소의 조합에서보다 복잡한 신호 조절 회로, 아날로그 / 디지털 변환 (A / D) 또는 전자파 방출에 이르기까지 신체에서 정보를 수집하거나 적용 할 수있는 장치를 설계 할...
참조

14.3.- 생체 의학 장비

Biomedical Equipment는 의학, 생물학 및 제약 분야에서 사용되는 장비 세트입니다. 생체 의학 장비의 설계는 정보를 얻거나 치료를 적용하거나 화학적 및 생물학적 과정을 수행하도록 설계된 생체 의학 기기와 직접 관련이 있습니다.의료 기술 분야에서 생체 의료 장비는 의료, 수술, 진단, 치료 및 재활 치료를위한 장치입니다. 이 장비의 목적은 활력 징후 제어, 호흡 제어 및 폐활량 측정 또는 전기 수술과 같은 임상 프로세스의 자동화입니다. 또한 마이크로파, 초음파 또는 자기 요법 사용과 같은 새로운 치료 방법을 적용...
참조

의용 생체 공학 장비

Showing 73-84 of 184 item(s)
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MVS

Suspension Bridge Unit

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MARP

Parabolic Arch Unit

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MART

Three-Hinged Arch Unit

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS
  • MFBS
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFBS

Unit for Studying Forces in a Simple Bar Structure

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFCS1

Unit for studying Forces in Different Single Plane Trusses

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFCS2

Unit for studying Forces in an Overdeterminate Truss

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFCS3

Unit for studying Deformation of Trusses

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFL

Two Hinged Arch Unit

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MPO

Portal Frame Unit

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

STH

Stress Hypotheses Unit

The Stress Hypotheses Unit, "STH", has been designed by EDIBON to study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MEPE

Simple Stability Problems Study Unit

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MDLE

Unit for studying Methods to Determine the Elastic Line

The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...
정보 요청