14.1.- 생체 역학

생체 역학은 인체의 움직임을 포함하여 생물체의 움직임 역학을 연구합니다. 이 연구는 직장이나 스포츠 활동과 같은 일상 생활의 가장 단순한 움직임에서 심장과 같은 일부 내부 장기의 움직임에 이르기까지 다양합니다. 인체 역학을 연구하기 위해 생체 역학은 역학 원리와 해부학 및 생리학 지식을 적용하여 새로운 진단 및 치료 기기를 설계하고 더 나은 보철 및 임플란트 설계를 개발할 수 있습니다.

현재 Biomechanics는 관절과 근육 조합의 다양한 움직임을 분석합니다. 이러한 분석을 통해 인체에 가해지는 하중과 스트레스를 연구 할 수 있습니다. 인간 운동학에 대한 지식은 부상 치료 및 후속 재활, 움직임의 유연성을 허용하는 보철 설계, 신체 활동의 성능을 높이기위한 새로운 스포츠 기술 검색 또는 신체의 악화를 방지합니다. 직장과 집에서 활동할 때. 이 모든 지식은 생체 역학의 여러 영역으로 나눌 수 있습니다 : 의료 생체 역학, 스포츠 생체 역학 및 직업 생체 역학. Biomechanics의 또 다른 응용 분야는 로봇 응용 프로그램의 설계입니다. 로봇 팔의 움직임이나 전기 기계 운동 시스템을 통해 움직이는 일부의 능력은 생명체의 역학에 기반합니다.

유기체의 기계적 행동에 대한 지속적인 연구는 생체 역학의 응용을 이끌어 실제 유기체의 정상적인 기능을 시뮬레이션하고 자극에 반응 할 수있는 생체 공학 보철물과 인공 유기체를 개발하고 있습니다. 또한 외골격 기술의 개선은 거동이 불편한 사람들의 이동성을 높이고 고부하 활동을 수행 할 때 신체 능력을 향상시킬 것입니다.

제품보기

생체 역학 장비

Showing 37-72 of 111 item(s)

Available

7.1.3.- 통계 및 역학

CGU

Centrifugal Governor Unit

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- 통계 및 역학

MED

Static and Dynamic Balancing Unit

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- 통계 및 역학

MES

Simple Balancing Unit

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- 통계 및 역학

MIF

Inertia Flywheel Unit

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- 통계 및 역학

MRYE1

Wheel and Axle Unit

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

MELH

Available

7.1.3.- 통계 및 역학

MELH

Unit for studying Hooke´s Law

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- 통계 및 역학

MRYE2

Wheel and Differential Axle Unit

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- 진동 및 진동

MEVTC

Computer Controlled Torsional Vibration Unit

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

MVRE

Available

7.1.4.- 진동 및 진동

MVRE

Vibration of Coil Spring Unit

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

Available

7.1.4.- 진동 및 진동

MVL

Free Vibration Unit

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- 진동 및 진동

MVLF

Free & Forced Vibration Unit

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

CMVAS

Available

7.1.4.- 진동 및 진동

CMVAS

기계적 진동 종합 분석 장비

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB

MEVLB

Available

7.1.4.- 진동 및 진동

MEVLB

Unit for Studying Free Vibration of a Bar

The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...

MSHU

Available

7.1.3.- 통계 및 역학

MSHU

Simple Harmonic Motion Unit

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- 통계 및 역학

SRI

Unit to Study Rotational Inertia

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

Available

7.1.4.- 진동 및 진동

MOT

Torsional Oscillations Unit

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- 진동 및 진동

MVCC

장치 임계 속도 연구 장비, 컴퓨터 제어

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

MEER

Available

7.1.4.- 진동 및 진동

MEER

장치 축 회전 연구 장비

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MCF

Belt Friction Unit

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEF

Friction Study Unit

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MPCO

Journal Bearing Unit

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT

Tribology Modular Unit

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-UB

Drive Unit for Tribological Tests

액세서리 MEMT

This unit is common for the modules type "MEMT".It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in the...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-1

미끄럼 베어링의 반경 방향 압력 분포

액세서리 MEMT

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-2

롤러에서 실린더의 동적 마찰

액세서리 MEMT

This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-3

디스크에서 볼트의 동적 마찰

액세서리 MEMT

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-4

바퀴의 구름 마찰

액세서리 MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-5

탄성 유체 동역학적 윤활

액세서리 MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

액세서리 MEMT

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MEMT-6

마찰 진동

액세서리 MEMT

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MCD

Thin Cylinder Unit

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MBF

Unit for Studying Bearing Friction

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A

MCF/A

Available

7.1.5.- 트라이 볼 로지 (마찰, 마모, 윤활)

MCF/A

Belt Friction Unit with Dynamometers

The Belt Friction Unit with Dynamometers, "MCF/A", designed by EDIBON, allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the...

MCPG

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MFPG

Unit for studying Forces in a Jib Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MVS

Suspension Bridge Unit

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

MARP

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MARP

Parabolic Arch Unit

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

추가 정보는 미국에 문의하십시오