8.8.- 유체 배관 시스템

엔지니어링에서 유체 도관은 소스에서 필요한 목적지로 유체를 운송 할 수있는 구조 또는 작업으로 정의됩니다. 폐쇄 형 (파이프, 터널 또는 하수도) 및 개방형 (자연 류)의 두 가지 유형의 파이프가 구분됩니다. 닫힌 파이프의 흐름은 일반적으로 자유 표면이있는 흐름과 달리 압력을받습니다.

더보기

파이프는 다양하고 다양한 작업에 사용되므로 개조해야합니다. 이를 위해 구성 요소가 있으며 파이프 라인의 주요 구성 요소는 파이프와 부품 (조인트, 엘보, 축소, 밸브 등)입니다. 또한 설계 사양 또는 작업 요구 사항에 따라 파이프는 펌핑 시스템, 중력 또는 두 메커니즘을 통해 유체를 운반 할 수 있습니다. 동시에, 다른 특성 중에서도 조악한 고체의 존재 또는 유체의 연마 특성 때문에 재료를 연구하는 것이 중요합니다.

파이프 라인의 가장 명확한 예는 식수 공급 및 분배 네트워크에서 찾을 수 있습니다. 안전과 위생을 보장해야하는 식수 소비 시설은 탱크, 파이프, 액세서리 등 다양한 요소로 구성되어 있습니다. 다른 예로는 폐기물과 빗물의 대피, 재사용 된 물을 사용하는 관개 네트워크 또는 건물의 빗물 관리를위한 파이프가 있습니다.

제품보기
유체 배관 시스템 UNITS
Showing 1-15 of 15 item(s)
FLUID FRICTION IN PIPES UNIT, WITH HYDRAULICS BENCH (FME00) - AFT
  • AFT
Available
8.8.- 유체 배관 시스템
AFT
Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00)
The Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings...
FLUID FRICTION IN PIPES UNIT - AFT/P
  • AFT/P
Available
8.8.- 유체 배관 시스템
AFT/P
Fluid Friction in Pipes Unit
The Fluid Friction in Pipes Unit, "AFT/P", is designed to determine the friction coefficient in pipes, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.This unit...
PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMT
  • AMT
Available
8.8.- 유체 배관 시스템
AMT
Pipe Network Unit, with Hydraulics Bench (FME00)
The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...
PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00/B) - AMT/B
  • AMT/B
Available
8.8.- 유체 배관 시스템
AMT/B
Pipe Network Unit, with Hydraulics Bench (FME00/B)
The Pipe Network Unit, without Hydraulics Bench (FME00), "AMT/B", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to...
MESH IN PIPE UNIT - AMT/P
  • AMT/P
Available
8.8.- 유체 배관 시스템
AMT/P
Mesh in Pipe Unit
The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...
COMPUTER CONTROLLED WATER HAMMER UNIT - EGAC
  • EGAC
Available
8.8.- 유체 배관 시스템
EGAC
Computer Controlled Water Hammer Unit
The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....
COMPUTER CONTROLLED FLOW OF COMPRESSIBLE FLUIDS UNIT - HFCC
  • HFCC
Available
8.7.5.- 압축기
HFCC
Computer Controlled Flow of Compressible Fluids Unit
The Computer Controlled Flow of Compressible Fluids Unit, "HFCC", allows to study the variation of pressure and density, the speeds of the fluid, the different fluctuations that the fluid presents when fluids across different sections in a pipe,...
COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC
  • TSCAC
Available
9.2.- 난방, 환기, 에어컨 및 온수
TSCAC
Computer Controlled Air Duct Systems Unit
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...
AIR FLOW STUDIES UNIT - HECA
  • HECA
Available
8.8.- 유체 배관 시스템
HECA
Air Flow Studies Unit
The Air Flow Studies Unit, "HECA", is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit is mounted on a...
정보 요청