AE-PLC-MA Multiple Pieces Feeder Workstation

MULTIPLE PIECES FEEDER WORKSTATION - AE-PLC-MA

혁신적인 시스템

The "AE-PLC-MA" is a Multiple Pieces Feeder Workstation commanded by a PLC, which provides three different types of pieces to be assembled in one piece by the industrial robot of the "AE-BR" unit.

일반적인 설명보기

일반적인 설명

The "AE-PLC-MA" is a Multiple Pieces Feeder Workstation commanded by a PLC, which provides three different types of pieces to be assembled in one piece by the industrial robot of the "AE-BR" unit.

The "AE-PLC-MA" contains an input pieces area, an output pieces area and an assembling zone where the three pieces can be mounted in one.

The "AE-PLC-MA" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

    • The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
    • The control panel: with start/stop button, emergency push button, reset button, light indicators to show current state of the process, etc.
    • The pneumatic circuit: contains the required solenoid valves, filters and regulators to assure the correct working and safety of the unit.
    • The workstation: is composed by real industrial components used by the industrial feeder systems such as limit switches, IR beam detectors, vertical storage for pieces, etc.

The "AE-PLC-MA" is designed to work with the "AE-BR" unit. The "AE-PLC-MA" is also included in several Flexible Manufacturing systems*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

연습 및 가이드

매뉴얼에 포함 된 가이드 실기 연습

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to pneumatics and electro-pneumatics.
  3. Study of the sensor detection.
  4. Configuration of a pneumatic application.
  5. Manual control of a Feeding system.
  6. Automatic control of a Feeding system.
  7. Change the parameters of the Feeding process.
  8. Optimize the process time.
  9. Study and analysis of the faults inserted in the process with the fault generation module.
  10. Configuration of the robotic arm as a pick and place system (AE-BR).
  11. Change the parameters of the pick and place process (AE-BR).
  12. Optimize the pick and place process (AE-BR).
  13. Configuration of the robotic arm as a mounting system (AE-BR).
  14. Change the parameters of the mounting process (AE-BR).
  15. Optimize the mounting process (AE-BR).

필수 구성 요소

추천되는 요소들

비슷한 제품

품질

판매 후 서비스