Due to the growing awareness of environmental problems, not only individuals but also governments and companies have started to develop activities that tend to preserve or limit the damage to the environment. Thus, some disciplines of the environmental science, such as hydrology, hydrogeology,...
RFS River Flow Simulator
創新系統
The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.
相關新聞
一般說明
The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.
The main element is a rectangular tank made of stainless steel supported on a metal beam frame, which enables the slope of the tank to be adjusted, even when it is full of sand and water.
Water flows and it is discharged from the rectangular tank into a storage tank through an adjustable height pipe, allowing the variation of the outlet conditions. An adjustable speed pump impels the water from there to an inlet vessel, measuring the flow rate with a flow meter. The inlet vessel can be located in any part of the main tank to enable water to be introduced and has a stilling system to make water flow slowly towards the main tank.
In the main tank, full of sand, is where the meanders, riffles, sediments, etc. are formed, so they can be studied and their surface profile analyzed with a depth gauge and a crossbeam.
練習和指導練習
手册中包含的指导实践练习
- Study of fluvial morphology.
- Visualization of river formations.
- Study of erosion.
- Study of sedimentation.
- Study of the characteristics of meandering water courses.
- Formation and development of river features over time.
- Study of the sediment transport.
- Analysis of hydrographs from the models behavior.
配套设备
13.1.- 水文水文地质学
ESHC(4x2m)
The main element of the unit is a test tank, which can be filled with sand. Water is supplied to the test tank through different systems: from two flexible separate hoses (simulating water inlets), from an inlet tank (simulating a river), from...
13.1.- 水文水文地质学
ESHC(2x1m)
Computer Controlled Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m)
The Computer Controlled Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m), "ESHC(2x1m)", is a self-contained unit designed to demonstrate some physical processes found in hydrology and fluvial geomorphology, including:...
13.1.- 水文水文地质学
ESH(2x1m)
Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m)
The Hydrological Systems, Rainfall Simulator and Irrigation Systems (2x1 m), "ESH(2x1m)", has been designed by EDIBON to demonstrate some of the physical processes encountered in hydrology and fluvial geomorphology. This includes rainfall...
13.1.- 水文水文地质学
ESHC(2x1m)/S
Computer Controlled Hydrologic Studies Unit
The Computer Controlled Hydrologic Studies Unit, "ESHC(2x1m)/S", allows the work in an autonomous way for the study of the behaviorof the water inside the soil being able to carry out a wide variety of experiments thanks to the specifications of...
13.1.- 水文水文地质学
ESH(2x1m)/S
Hydrologic Studies Unit
The Hydrological Studies Unit, "ESH(2x1m)/S", has been designed by EDIBON to enable autonomous work in the study of water behavior within the soil. A wide variety of experiments can be conducted thanks to the specifications of the unit.The unit...
13.1.- 水文水文地质学
RHU
Rainfall Hydrographs Unit
The main element of the Rainfall Hydrographs Unit,"RHU", is a tank mounted on a frame. The tank can be filled with sand. There are removable curtains to prevent splashing.There are two square pattern spray nozzles at the top that supply water to...
13.1.- 水文水文地质学
RSESC
计算机控制的雨水模拟装置
The Computer Controlled Rainfall Simulator for Soil Erosion Studies, "RSESC", consists of a metal frame that can be placed directly on the ground for direct studies or used with its different accessories for laboratory tests.The entire frame is...
13.1.- 水文水文地质学
RSES
Rainfall Simulator for Soil Erosion Studies
The Rainfall Simulator for Soil Erosion Studies, "RSES", consists of a metal frame that can be placed directly on the ground for direct field studies or used with its various accessories for laboratory tests. The whole structure is covered with a...
13.1.- 水文水文地质学
HVFLM-2
移动床和流量可视化单元 (工作区: 2000x610 mm)
The Mobile Bed and Flow Visualization Unit (working section: 2000x610 mm), "HVFLM-2", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....
13.1.- 水文水文地质学
HVFLM-4
移动床和流量可视化单元 (工作区: 4000x610 mm)
The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....
13.1.- 水文水文地质学
CAS
泥沙移动示范流道
The Sediment Transport Demonstration Channel, "CAS", designed by EDIBON, consist of an inclinable channel mounted on a base plate, supported by two supports, with a discharge tank and recirculating pump. This tank is in the Basic Hydraulic Feed...
11.1.11.- 过滤, 沉淀和混合
PDFDC
计算机控制排水和防渗水槽
This unit has been designed for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The unit basically consist of a tank (soils container) to contain the sand, lower water...