BS2-PLC Temperature Test Module for PLC

TEMPERATURE TEST MODULE FOR PLC - BS2-PLC

SISTEMAS INOVADORES

The "PLC-BS2" has been designed to study the use and applications of temperature sensors as a measure device and how to perform a temperature control through a PLC.

Ver descrição geral

Descrição Geral

The "PLC-BS2" has been designed to study the use and applications of temperature sensors as a measure device and how to perform a temperature control through a PLC. The unit is equipped with a half-open space in whose interior there are one lamp that heat the inside of the module and a series of temperature sensors of different technologies placed in different positions. One of the temperature sensors output signal is conditioned to be connected to the PLC. The temperature inside the module can be controlled by the PLC, depending on the signal obtained from the temperature sensor.

* Available PLC models of different manufacturers: PANASONIC, SIEMENS, OMRON, MITSUBISHI, ALLEN BRADLEY, etc.

EXERCÍCIOS E PRÁTICAS GUIADAS

EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL

  1. How to use the Curie effect as application of a high temperature thermostatic controller.
  2. Adjustable bimetallic thermostat. To use the bimetallic thermostat as a temperature controller, calculating its hysteresis.
  3. Adjustable bimetallic thermostat. How we can reduce the hysteresis by adding a resistor to the heating circuit.
  4. To use the thermostat based on a bimetallic sensor to control the temperature.
  5. To use the capillary thermostat.
  6. Using the analog inputs and outputs of the PLC to read and write analog signals.
  7. Read the temperature sensor signal with the PLC.
  8. Manual control of the actuator through the PLC.
  9. PID control of the temperature value through the PLC.
  10. Observe the effects of the temperature control to changes in the PID parameters.

ELEMENTOS INCLUÍDOS

Qualidade

Serviço pós-venda

Solicitar informação