On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
0230 TRANSDUCERS AND SENSORS. Basic Module
EDUCAÇÃO TÉCNICA SUPERIOR
ENGENHARIA FLORESTAL
ENGENHEIRO QUÍMICA
ENGENHARIA DE PROCESSOS
CENTRO DE FORMAÇÃO DE PETRÓLEO
ENGENHARIA NAVAL
ENGENHARIA ELETRÔNICA
ENGENHARIA AUTOMÁTICA
CENTRO DE FORMAÇÃO DE ENERGIA
ENGENHARIA ELÉTRICA
ENGENHARIA DE SISTEMAS
ENGENHARIA AERONÁUTICA
ENGENHARIA DO OCEANO E CIÊNCIAS MARINHAS
FÍSICA
ENGENHARIA INDUSTRIAL
CENTRO INTERNACIONAL DE FORMAÇÃO TÉCNICA, DESENVOLVIMENTO E INVESTIGAÇÃO
ENGENHARIA METALÚRGICA
ENGENHARIA DE TELECOMUNICAÇÃO
ESCOLAS TÉCNICAS
ELETRÔNICA
COMUNICAÇÕES
ELETRICIDADE
AUTOMOTIVO
QUÍMICA INDUSTRIAL
QUÍMICA
NOTÍCIAS RELACIONADAS
EQUIPAMENTOS COMPLEMENTARES
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS1
Módulo de Ensaios de Vibração e/ou Deformação
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS10
Módulo de Ensaios de Iluminação
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS2
Módulo de Ensaios de Temperatura
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS3
Módulo de Ensaios de Pressão
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS4
Módulo de Ensaios de Vazão
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS5
Módulo de Ensaios de Fornos
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS6
Módulo de Ensaios de Nível de Líquidos
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS7
Módulo de Ensaios de Tacômetro
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS8
Módulo de Ensaios de Proximidade
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS9
Módulo de Ensaios de Pneumática
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BSPC
Unidade Base para BS, Controlada por Computador (PC)
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
SAIT
Equipamento de Transdutores e Instrumentação
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...