SPC Weighing System, with Computer Data Acquisition

혁신적인 시스템

The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.

일반적인 설명보기

컨테스트 사양

확장

ICAI

Interactive Computer Aided Instruction Software

실험실

일반적인 설명

It has different adaptors according to the measurement to be performed: hook adaptor type to measure weight or conical, chisel and flat head adaptor to determine compression forces.

The software of the unit allows to perform a computerized monitoring of the measurements taken.

연습 및 가이드

매뉴얼에 포함 된 가이드 실기 연습

Weight high precission measurement.
Compression forces high precission measurement.

보완 장비

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- 전력 전자 (기초)

SCSP

Pressure Sensors Calibration System

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS

Available

6.1.2.1.- 센서 및 전자 기기

센서 스터디 모듈 시스템

The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...

COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC

BSPC

Available

6.1.2.1.- 센서 및 전자 기기

BSPC

컴퓨터(PC)로 제어되는 BS 기본 유닛

The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...

BSUB

Available

6.1.2.1.- 센서 및 전자 기기

BSUB

BS 기본 유닛

The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...

VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1

Available

6.1.2.1.- 센서 및 전자 기기

BS1

진동 및/또는 변형 실험 모듈

Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...

Available

6.1.2.1.- 센서 및 전자 기기

BS2

온도 실험 모듈

The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....

Available

6.1.2.1.- 센서 및 전자 기기

BS3

압력 실험 모듈

The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...

Available

6.1.2.1.- 센서 및 전자 기기

BS4

유량 실험 모듈

The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...

Available

6.1.2.1.- 센서 및 전자 기기

BS5

오븐 실험 모듈

With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...

Available

6.1.2.1.- 센서 및 전자 기기

BS6

액체 레벨 실험 모듈

The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...

Available

6.1.2.1.- 센서 및 전자 기기

BS7

타코미터 실험 모듈

The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...

Available

6.1.2.1.- 센서 및 전자 기기

BS8

근접 시험 모듈

The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...

품질

판매 후 서비스

추가 정보는 미국에 문의하십시오

SPC Weighing System, with Computer Data Acquisition

혁신적인 시스템

확장

실험실

관련 뉴스

일반적인 설명

연습 및 가이드

매뉴얼에 포함 된 가이드 실기 연습

보완 장비

품질

판매 후 서비스