10.- PENGENDALIAN PROSES

Peralatan atau proses yang memerlukan pemeliharaan beberapa parameter tetap dapat dengan mudah ditemukan di industri. Kecepatan motor, aliran, level dan suhu dari sirkuit hidrolik atau tekanan sistem udara tekan adalah contoh yang baik. Tujuan dari rekayasa kontrol proses adalah otomatisasi dari proses ini melalui penerapan sistem pemantauan dan kontrol.

Lihat Lebih Banyak

Disiplin ini mencakup dari studi tentang dinamika sistem dan instrumentasi yang terlibat (sensor, aktuator, pengontrol, dll.) untuk pengembangan strategi kontrol dan implementasi berikutnya, termasuk studi tentang protokol komunikasi industri yang berbeda yang digunakan dalam jenis ini sistem (Fieldbus, HART, dll.).

Saat ini, algoritme kontrol yang paling umum digunakan adalah kontrol PID (proporsional, integral, dan turunan). Dari mekanisme kontrol ini, strategi yang lebih kompleks telah dikembangkan, seperti kontrol bertingkat, kontrol multivariabel, kontrol penerusan dan kontrol selektif. Strategi ini diterapkan menggunakan aplikasi pengontrol industri, pengontrol logika terprogram (PLC) dan aplikasi kontrol dan akuisisi SCADA yang, selain kontrol, izinkan visualisasi proses. Kontrol dapat dilakukan dengan satu perangkat kontrol (sistem kontrol terpusat) atau melalui jaringan pengontrol yang terorganisir (kontrol terdistribusi sistem).

Peningkatan produktivitas dan efisiensi yang disediakan sistem kontrol untuk proses industri mendukung penelitian algoritme kontrol lanjutan, baru, seperti kontrol prediksi, kontrol adaptif, atau kontrol fuzzy.

Lihat Produk
Materi Terkait
PENGENDALIAN PROSES SUBCATEGORIES

10.1.- TEORITIS - DASAR PRAKTIS

Kontrol otomatis adalah cabang teknik yang berhubungan dengan regulasi operasi peralatan, proses atau menyelesaikan pabrik, menggunakan kumpulan perangkat dan mekanisme yang disebut sistem kontrol. Sistem kontrol loop terbuka bekerja pada masukan sistem (aktuator ) tanpa memperhitungkan nilai...
lihat

10.2.- PENGONTROL & KOMUNIKASI INDUSTRI

Evolusi dalam kontrol pabrik industri besar memunculkan jenis sistem baru di mana kontrol tidak lagi diterapkan dalam satu perangkat: sistem kontrol terdistribusi atau DCS. Dalam sistem ini, proses untuk mengotomatiskan dibagi menjadi loop kontrol sederhana yang diatur secara lokal oleh...
lihat

10.3.- APLIKASI DAN SISTEM INDUSTRI

Pengoperasian peralatan dan pabrik yang optimal sangat penting dalam industri proses. Beberapa perangkat dipasang untuk mencapai tujuan ini: sensor untuk mengukur parameter yang akan diatur (variabel terkontrol), aktuator untuk memungkinkan modifikasi nilainya (variabel yang dimanipulasi), dan...
lihat
10.1.- TEORITIS - DASAR PRAKTIS 10.2.- PENGONTROL & KOMUNIKASI INDUSTRI 10.3.- APLIKASI DAN SISTEM INDUSTRI
PENGENDALIAN PROSES UNITS
1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK, OTOMASI & KOMPUMEKATRONIK 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
10.1.- TEORITIS - DASAR PRAKTIS 10.2.- PENGONTROL & KOMUNIKASI INDUSTRI 10.3.- APLIKASI DAN SISTEM INDUSTRI
Menampilkan 1 -30 dari 41 produk
12 24 36
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- TEORITIS - DASAR PRAKTIS
RYC/T
Computer Controlled Modular Control and Regulation Unit
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
Lihat Unit
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-BB
Ball and Beam Module
Aksesori dari RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
Lihat Unit
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-SM
DC Servo Motor Module
Aksesori dari RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
Lihat Unit
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-TAR
Air Flow Temperature Control Module
Aksesori dari RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
Lihat Unit
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-PI
Inverted Pendulum Control Module
Aksesori dari RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
Lihat Unit
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-CLM
Magnetic Levitation Control Module
Aksesori dari RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
Lihat Unit
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-TAG
Water Flow Temperature Control Module
Aksesori dari RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
Lihat Unit
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-TE
Temperature Control Module
Aksesori dari RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
Lihat Unit
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-P
Pressure Control Module
Aksesori dari RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
Lihat Unit
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-N
Level Control Module
Aksesori dari RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
Lihat Unit
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-C
Flow Rate Control Module
Aksesori dari RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
Lihat Unit
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-I
Luminosity Control Module
Aksesori dari RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
Lihat Unit
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-pH
pH Control Module
Aksesori dari RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
Lihat Unit
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-CP
Position Control Module
Aksesori dari RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
Lihat Unit
INDUSTRIAL CONTROLLERS UNIT - CECI
  • CECI
Available
6.1.1.2.- PENGONTROL INDUSTRI
CECI
Pelatihan Kontrol Industri
The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
Lihat Unit
INDUSTRIAL CONTROLLERS NETWORKING - CRCI
  • CRCI
Available
6.1.1.2.- PENGONTROL INDUSTRI
CRCI
Jaringan Kontrol Industri
The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
Lihat Unit
COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC
  • CEAC
Available
6.1.1.2.- PENGONTROL INDUSTRI
CEAC
Pelatihan Penyesuai Kontrol
The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
Lihat Unit
FIELD BUS APPLICATIONS UNIT - CEAB
  • CEAB
Available
6.1.1.2.- PENGONTROL INDUSTRI
CEAB
Pelatihan untuk Aplikasi Field Bus
The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
Lihat Unit
APPLICATIONS FOR PROCESS CONTROL - APC
  • APC
Available
10.3.- APLIKASI DAN SISTEM INDUSTRI
APC
Applications for Process Control
The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...
Lihat Unit
Meminta informasi