At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
AE-PLC-FT Filtration Workstation
BERITA TERKAIT
GAMBARAN UMUM
The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of valves. The system is equipped with pressure and level sensors in order to ensure a high quality of the filtration process.
The "AE-PLC-FT" workstation has been designed as a modular system to facilitate the understanding of the equipment operation:
- The PLC: is composed of an AE-PLCB that contains a HMI device, analog and digital input/output modules, etc, and the required extra modules to put into operation the workstation successfully.
- The control panel: emergency stop push button switch, start/stop button, reset button, light indicator to show the state of the workstation, etc.
- The pneumatic circuit: contains the required solenoid valves, filters and regulators to assure the correct working and safety of the unit.
- The workstation: is composed of real components used by the industrial automatic conveyor systems such as: capacitive sensors, limit switch sensors, position sensor, etc.
The "AE-PLC-FT" workstation can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.
*The Flexible manufacturing systems product list is available at the "60.-MECHATRONICS, AUTOMATION AND COMPUMECHATRONICS" area.
PERALATAN SIMILAR TERSEDIA
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MS
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-PHD
Punching Workstation
The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-FS
Filling Workstation
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-CRS
Corking Workstation
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-APB
Bottle Opening Workstation
The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-M
Mounting Workstation
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-P
Automatic Pressing Workstation
The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-AT
Automatic Screw Workstation
The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MEMB
Bottling Workstation
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MET
Labelling Workstation
The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-ST
Drilling Workstation
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-SMOLD
Molding Workstation
The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-SCOR
Cutting Workstation
The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-CP
Control Processes Workstation
The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
PERALATAN KOMPLEMENTER
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-M
Mounting Workstation
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-P
Automatic Pressing Workstation
The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-AT
Automatic Screw Workstation
The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MEMB
Bottling Workstation
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MET
Labelling Workstation
The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-ST
Drilling Workstation
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-SMOLD
Molding Workstation
The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-SCOR
Cutting Workstation
The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MS
Mixing Workstation
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-PHD
Punching Workstation
The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-FS
Filling Workstation
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-CRS
Corking Workstation
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...