6.2.5.- APPLICATIONS DE STATION DE TRAVAIL AVEC PLC

PRODUITS DE APPLICATIONS DE STATION DE TRAVAIL AVEC PLC
Affichage 1-24 de 43 article(s)
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- APPLICATIONS DE POSTES DE TRAVAIL DE PIÈCES
AE-PLC-APS
Alimentateur de Pieces
L'Alimentateur de Pieces, "AE-PLC-APS", est une unité qui fonctionne avec des technologies pneumatiques et électropneumatiques.La fonction de "AE-PLC-APS" est de fournir des pièces et de les vérifier, si elles sont acceptables.Les pièces seront...
FEEDING WORKSTATION FOR PIECES - AE-PLC-A
  • AE-PLC-A
Available
6.2.5.1.- APPLICATIONS DE POSTES DE TRAVAIL DE PIÈCES
AE-PLC-A
Station Alimentateur de Pieces
The "AE-PLC-A" is a feeder workstation commanded by a PLC that provides pieces to the system. The "AE-PLC-A" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place at the quality control zone. The system...
MULTIPLE PIECES FEEDER WORKSTATION - AE-PLC-MA
  • AE-PLC-MA
Available
6.2.5.1.- APPLICATIONS DE POSTES DE TRAVAIL DE PIÈCES
AE-PLC-MA
Poste de Travail de Chargeur de Pièces Multiples
The "AE-PLC-MA" is a Multiple Pieces Feeder Workstation commanded by a PLC, which provides three different types of pieces to be assembled in one piece by the industrial robot of the "AE-BR" unit.The "AE-PLC-MA" contains an input pieces area, an...
PIECES DISTRIBUTOR WORKSTATION - AE-PLC-DS
  • AE-PLC-DS
Available
6.2.5.1.- APPLICATIONS DE POSTES DE TRAVAIL DE PIÈCES
AE-PLC-DS
Station de Distribution de Pièces
The "AE-PLC-DS" is a feeder workstation commanded by a PLC, which provides pieces made in different color and materials to the system. The "AE-PLC-DS" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place...
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-M
Station de Montage
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
AUTOMATIC PRESSING WORKSTATION - AE-PLC-P
  • AE-PLC-P
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-P
Station de Pressage Automatique
The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
AUTOMATIC SCREW WORKSTATION - AE-PLC-AT
  • AE-PLC-AT
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-AT
Station de Vis Automatique
The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-MEMB
Station d'Embouteillage
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
LABELLING WORKSTATION - AE-PLC-MET
  • AE-PLC-MET
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-MET
Station d'Étiquetage
The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-ST
Station de Forage
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-SMOLD
Station de Moulage
The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-SCOR
Station de Découpe
The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-FT
Station de Travail de Filtration
The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-MS
Station de Travail Mixte
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
PUNCHING WORKSTATION - AE-PLC-PHD
  • AE-PLC-PHD
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-PHD
Station de Poinçonnage
The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-FS
Station de Remplissage
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-CRS
Station de Travail en Liège
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-APB
Poste de Travail d'Ouverture de Bouteille
The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL
AE-PLC-CP
Poste de Travail de Processus de Contrôle Industriel
The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
ROTARY TABLE WORKSTATION 1 - AE-PLC-MR1
  • AE-PLC-MR1
Available
6.2.5.3.- POSTES DE TRAVAIL DE LA TABLE ROTATIVE
AE-PLC-MR1
Station de Table Rotative 1
The "AE-PLC-MR1" is an automatic rotary table with a feeder, quality control and mounting system integrated into it. The "AE-PLC-MR1" has a vertical storage, the system provides pieces one by one to the rotary table, then, a quality control system...
ROTARY TABLE WORKSTATION 2 - AE-PLC-MR2
  • AE-PLC-MR2
Available
6.2.5.3.- POSTES DE TRAVAIL DE LA TABLE ROTATIVE
AE-PLC-MR2
Station de Table Rotative 2
The "AE-PLC-MR2" an automatic rotary table with a feeder, quality control and mounting system integrated in it. The "AE-PLC-MR2" has a vertical storage, the system provide pieces one by one to the rotary table, then, a quality control system check...
ROTARY TABLE WORKSTATION 3 - AE-PLC-MR3
  • AE-PLC-MR3
Available
6.2.5.3.- POSTES DE TRAVAIL DE LA TABLE ROTATIVE
AE-PLC-MR3
Station de Table Rotative 3
The "AE-PLC-MR3" is a processing workstation with a rotary table commanded by a PLC. This unit takes a piece from the input area, checks if the position of piece is correct, and simulates drilling the piece with a movable drilling machine. Finally...
ROTARY TABLE WORKSTATION 4 - AE-PLC-MR4
  • AE-PLC-MR4
Available
6.2.5.3.- POSTES DE TRAVAIL DE LA TABLE ROTATIVE
AE-PLC-MR4
Station de Table Rotative 4
The "AE-PLC-MR4" is a rotary table workstation commanded by a PLC that perform the bottling, filling and capping functions.The "AE-PLC-MR4" workstation has been designed as a modular system to facilitate the understanding of the equipment...
PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS
  • AE-PLC-MPS
Available
6.2.5.4.- STATIONS DE TRAVAIL DE MANIPULATIONS DE PIECES
AE-PLC-MPS
Station de Manutention de Pièces
The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
Demander des informations