9.10.- INSTALLATIONS ET MAINTENANCE

Les besoins de la société actuelle sont un défi pour toute industrie, car ils doivent être en constante évolution et renouvellement pour s'adapter à ces besoins.

Voir plus

Ces dernières années, à la suite de la nouvelle révolution industrielle ou Industrie 4. 0, l'émergence de l'Internet industriel des choses (IIoT) et des usines intelligentes, cette adaptation est possible grâce à l'application des techniques les plus sophistiquées dans la conception de nouvelles installations ou dans la rénovation d'installations existantes.

Malgré toutes ces avancées technologiques et les contrôles exhaustifs effectués, il ne faut pas oublier que tout élément qui participe au processus productif va être soumis à une usure mécanique et électrique(eforces, charges, etc.) et sa vie utile est limitée. Pour éviter des pannes catastrophiques, des arrêts de production ou tout type de processus qui impliquent une augmentation des temps non-productifs et, par conséquent, une augmentation des coûts, il est extrêmement important de réaliser un bon entretien des machines, systèmes électriques, etc.

Traditionnellement, seuls deux types de entretien étaient considérés:

  • Correctif: la faute est résolue une fois qu'elle s'est déjà produite.
  • Préventive: examen périodique de tous ces éléments problématiques et leur remplacement si nécessaire.

Ces types de maintenance impliquent des coûts très élevés et inutiles dans la plupart des cas. Aujourd'hui, grâce à la technologie disponible, il est possible d'effectuer une maintenance prévictive consistant en une analyse complète de toutes les variables qui interviennent dans tous les composants d'un système et de pouvoir les remplacer au bon moment./div>

Mais, si l'on préfère mieux maîtriser les défaillances qui peuvent affecter tous ces composants mécaniques soumis à l'usure, il existe un autre type de maintenance, appelé maintenance proactive. Il va plus loin que la maintenance préventive, en cherchant la racine du problème.

Voir les produits
PRODUITS DE INSTALLATIONS ET MAINTENANCE
Affichage 1-30 de 37 article(s)
UNIT TO STUDY A FILTER DRIER  CUTAWAY MODEL - DFCM
  • DFCM
Available
9.10.1.- MODÈLES EN COUPE
DFCM
Unité d'Étude d'Un Modèle de Filtre Sécheur En Coupe
The Unit to Study a Filter Drier Cutaway Model, "DFCM", allows the students to visualize the inner parts of a (element), to evaluate the relation with each other accurately and to understand their functionThe cutaway model of a filter drier is...
UNIT TO STUDY A GAS METER CUTAWAY MODEL - GMCM
  • GMCM
Available
9.10.1.- MODÈLES EN COUPE
GMCM
Unité d'Étude d'Un Modèle de Coupe de Compteur de Gaz
The Unit to Study a Gas Meter Cutaway Model, "GMCM", allows the students to visualize the inner parts of a gas meter, to evaluate the relation with each other accurately and to understand their function.It is a measurement device to determine the...
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TIR
Unité d'Introduction de Réfrigération
The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEMT
Unité de Formation pour Mesures de Température
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TRAMC/1
Modèle de Réfrigération Domestique
Accessoire de TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TRAMC/4
Modèle Complet de Système de Conditionnement d'Air
Accessoire de TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
MEASUREMENT AND REGULATION STATION UNIT - MRST
  • MRST
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
MRST
Unité de Station de Mesure et de Régulation
The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit. The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
INSTANTANEOUS GAS HEATER EXPERIMENTATION UNIT - IGHT
  • IGHT
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
IGHT
Unité d'expérimentation de Chauffe-eau Instantané à Gaz
The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
FORCED DRAFT GAS BURNER UNIT - GBT
  • GBT
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
GBT
Unité Expérimental avec Brûleur à Gaz à Tirage Forcé
The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
RT
Unité de Formation sur Radiateurs
The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
THST
Unité de Formation de Chauffage
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEV3V
Unité de Formation de Valvule Mélangeuse de 3 Voies
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEV4V
Unité de Formation de Valvule Mélangeuse de 4 Voies
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEIS
Unité de Formation de Raccords Sanitaires
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
Demander des informations