6.3.- PLC COMPUMECHATRONICS

Computer mechatronics is the technology able to implement communication between machines and computers, enabling the control of processes based on real-time data, adjust parameters and act on production processes remotely.

View more

The application of Computer Mechatronics in the current industry is based on real-time data acquisition to be processed or stored. Depending on the data collected, it is possible to carry out a supervision of a complete industrial process, applying sequential control by means of a programmable logic controller (PLC), or a modification of the operating parameters of a machine. All this continuous data collection allows for managing a production through a simple data analysis. One of the systems implemented in the industry when it comes to computer control is the SCADA system. The SCADA system offers automatic process control from a computer screen.

The continuous improvement of the industrial processes and the search for new forms of production organization are laying the foundations of the Industry 4.0 or smart factories. This industry seeks complete digitalization and automation, generating a regular flow of information and interconnecting all the elements of a process through the so-called IoT (Internet of Things). The need for process flexibility and manufacturing efficiency involves the development of computer-controlled autonomous factories.

View Products
PLC COMPUMECHATRONICS UNITS
Showing 1-30 of 132 item(s)
COMPUTER CONTROLLED PHOTOVOLTAIC SOLAR ENERGY UNIT - EESFC
  • PLC-EESFC
Available
6.3.3.- RENEWABLE
PLC-EESFC

PLC Industrial Process Control for EESFC

The Computer Controlled Photovoltaic Solar Energy Unit, "EESFC", includes equipment that uses the photo-conversion law for the direct conversion of solar radiation into electricity. The absorbed energy is provided by simulated solar radiation,...
COMPUTER CONTROLLED THERMAL SOLAR ENERGY UNIT - EESTC
  • PLC-EESTC
Available
6.3.3.- RENEWABLE
PLC-EESTC

PLC Industrial Process Control for EESTC

The Computer Controlled Thermal Solar Energy Unit, "EESTC", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed...
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • PLC-EEEC
Available
6.3.3.- RENEWABLE
PLC-EEEC

PLC Industrial Process Control for EEEC

The Computer Controlled Wind Energy Unit, “EEEC”, contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
COMPUTER CONTROLLED WIND ENERGY BASIC UNIT - MINI-EEEC
  • PLC-MINI-EEEC
Available
6.3.3.- RENEWABLE
PLC-MINI-EEEC

PLC Industrial Process Control for MINI-EEEC

The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up...
COMPUTER CONTROLLED WAVES ENERGY UNIT - EOMC
  • PLC-EOMC
Available
6.3.3.- RENEWABLE
PLC-EOMC

PLC Industrial Process Control for EOMC

The Computer Controlled Waves Energy Unit “EOMC” is an unit in scale, designed to study the wave energy and the influence of several variables. The unit consists of a Base Service Unit and Waves Generator “EOMC-UB” and several Modules to be used...
COMPUTER CONTROLLED TIDAL ENERGY UNIT - EMMC
  • PLC-EMMC
Available
6.3.3.- RENEWABLE
PLC-EMMC

PLC Industrial Process Control for EMMC

Tidal energy is another way to generate electricity extracting energy from the sea. Twice a day big volumes of water rise and fall with the tides.A Tidal Barrage make use of the potential energy in the difference in height (or head) between high...
COMPUTER CONTROLLED SUBMARINE CURRENTS ENERGY UNIT - ECMC
  • PLC-ECMC
Available
6.3.3.- RENEWABLE
PLC-ECMC

PLC Industrial Process Control for ECMC

An interesting technology for harnessing the energy from the ocean currents is the use of turbine-driven generators anchored in place in the current stream.The blades of the turbine are driven by the moving water. These blades are used to turn the...
COMPUTER CONTROLLED OCEAN THERMAL ENERGY UNIT - ETMC
  • PLC-ETMC
Available
6.3.3.- RENEWABLE
PLC-ETMC

PLC Industrial Process Control for ETMC

The Computer Controlled Ocean Thermal Energy Unit, "ETMC", unit is designed for simulating an energy generation system that extracts the thermal energy from the upper layers of the ocean, using them as the hot focus of a thermal cycle and the deep...
COMPUTER CONTROLLED RERVERSIBLE HEAT PUMP + AIR CONDITIONING + REFRIGERATION WITH 2 CONDENSERS AND 2 EVAPORATORS (WATER/AIR)
  • PLC-THIBAR22C
Available
6.3.7.- THERMODYNAMICS & THERMOTECHNICS
PLC-THIBAR22C

PLC Industrial Process Control for THIBAR22C

The unit “THIBAR22C” has as aim introduce the student to the study of the heat pumps, air conditioning and refrigeration, as well as the analysis and determination of the operation typical parameters of the unit depending on the two types of...
COMPUTER CONTROLLED PELTON TURBINE - TPC
  • PLC-TPC
Available
6.3.6.- FLUID MECHANICS
PLC-TPC

PLC Industrial Process Control for TPC

The Computer Controlled Pelton Turbine, "TPC", consists of a small scale Pelton turbine with a valve to regulate the flow.The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through the turbine’s transparent...
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • PLC-TFC
Available
6.3.6.- FLUID MECHANICS
PLC-TFC

PLC Industrial Process Control for TFC

The Computer Controlled Francis Turbine, "TFC", developed by EDIBON has a Francis turbine in miniature which has a distributor with adjustable guide vanes allowing to control the water incidence angle in the turbine. To regulate the distributor,...
COMPUTER CONTROLLED KAPLAN TURBINE - TKC
  • PLC-TKC
Available
6.3.6.- FLUID MECHANICS
PLC-TKC

PLC Industrial Process Control for TKC

The Computer Controlled Kaplan Turbine “TKC” designed by EDIBON is a small scale Kaplan turbine with a ring with adjustable wicket gates, which enable to control the water flow in the turbine.There is a computer controlled pump to rise the fluid....
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • PLC-TFAC
Available
6.3.6.- FLUID MECHANICS
PLC-TFAC

PLC Industrial Process Control for TFAC

The Computer Controlled Axial Flow Turbine,"TFAC", developed by EDIBON, consists of a simple one stage turbine with axial flow inlet. It has eight nozzles which work as water distributors towards the rotor. Four of those nozzles have an incidence...
COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC
  • PLC-HTRC
Available
6.3.6.- FLUID MECHANICS
PLC-HTRC

PLC Industrial Process Control for HTRC

The characteristic behaviour of a reaction turbine at small scale can be studied with the Computer Controlled Experimental Reaction Turbine, "HTRC".This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC
  • PLC-HTIC
Available
6.3.6.- FLUID MECHANICS
PLC-HTIC

PLC Industrial Process Control for HTIC

The Computer Controlled Experimental Impulse Turbine, "HTIC", allows to study the characteristics and the behavior of an impulse turbine.This unit includes all the necessary instrumentation and sensors for controlling and measuring the most...
COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC
  • PLC-MBMRC
Available
6.3.5.- MECHANICS
PLC-MBMRC

PLC Industrial Process Control for MBMRC

The Computer Controlled Balance of Reciprocating Masses Unit “MBMRC” is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • PLC-EEFC
Available
6.3.5.- MECHANICS
PLC-EEFC

PLC Industrial Process Control for EEFC

The Computer Controlled Fatigue Testing Unit, “EEFC”, designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches. An electric motor is fixed to the...
COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC
  • PLC-TDRC
Available
6.3.5.- MECHANICS
PLC-TDRC

PLC Industrial Process Control for TDRC

Unit for the demonstration of the methods of noise and vibration control. It allows audible experimentation of the effect of the noise frequency on the effectiveness of attenuation methods.
COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC
  • PLC-TSCAC
Available
6.3.7.- THERMODYNAMICS & THERMOTECHNICS
PLC-TSCAC

PLC Industrial Process Control for TSCAC

With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...
COMPUTER CONTROLLED UNIT FOR TRANSIENT DRAINAGE PROCESSES IN STORAGE RESERVOIRS - PDDRC
  • PLC-PDDRC
Available
6.3.10.- ENVIRONMENT
PLC-PDDRC

PLC Industrial Process Control for PDDRC

The Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs, "PDDRC", allows to investigate transient drainage processes in storage reservoirs, to simulate a rainwater retention basin and to study the operation of a surge...
COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC
  • PLC-PBOC
Available
6.3.6.- FLUID MECHANICS
PLC-PBOC

PLC Industrial Process Control for PBOC

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most representative parameters of the...
COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (2 TYPES OF PUMPS) - PB2C
  • PLC-PB2C
Available
6.3.6.- FLUID MECHANICS
PLC-PB2C

PLC Industrial Process Control for PB2C

The Computer Controlled Multipump Testing Bench (2 types of pumps), "PB2C", allows the students to study the operating characteristics of the centrifugal and gear pumps. This unit allows to control and to measure the most representative parameters...
COMPUTER CONTROLLED CENTRIFUGAL PUMP BENCH - PBCC
  • PLC-PBCC
Available
6.3.6.- FLUID MECHANICS
PLC-PBCC

PLC Industrial Process Control for PBCC

The Computer Controlled Centrifugal Pump Bench, “PBCC”, is a bench-top unit consists of a centrifugal pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PLC-PBEC
Available
6.3.6.- FLUID MECHANICS
PLC-PBEC

PLC Industrial Process Control for PBEC

The Computer Controlled Gear Pump Bench, “PBEC”, is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PLC-PBAC
Available
6.3.6.- FLUID MECHANICS
PLC-PBAC

PLC Industrial Process Control for PBAC

The Computer Controlled Axial Pump Bench, “PBAC”, is designed to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve. Besides, it...
COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC
  • PLC-PBRC
Available
6.3.6.- FLUID MECHANICS
PLC-PBRC

PLC Industrial Process Control for PBRC

The Computer Controlled Piston Pump Bench, “PBRC”, is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...
COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC
  • PLC-HMFAC
Available
6.3.6.- FLUID MECHANICS
PLC-HMFAC

PLC Industrial Process Control for HMFAC

The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...
COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC
  • PLC-PBSPC
Available
6.3.6.- FLUID MECHANICS
PLC-PBSPC

PLC Industrial Process Control for PBSPC

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • PLC-TFRC
Available
6.3.6.- FLUID MECHANICS
PLC-TFRC

PLC Industrial Process Control for TFRC

This unit consists of a Radial Turbine, with two nozzles at 90º degrees with respect to the perpendicular direction of the rotating axis.There is a pressure sensor placed at the water inlet of the turbine to measure the admission pressure. A band...