BDCM Unit to Study a Variable Speed Trapezoidal Belt Drive Cutaway Model

7.4.1.- ABSCHNITTLICHE MODELLE

UNIT TO STUDY A VARIABLE SPEED TRAPEZOIDAL BELT DRIVE CUTAWAY MODEL - BDCM

INNOVATIVE SYSTEME

Variable speed belt drives are commonly used in motorcycles.

Allgemeine Beschreibung anzeigen

Katalog

Wettbewerbsspezifikationen

Erweiterungen

ICAI

Interaktive Computerunterrichtssoftware

MSAC

Modulares Erfassungs- und Steuerungssystem

ALLGEMEINE BESCHREIBUNG

It is a variable speed belt drive. Continuously variable gearboxes are the ideal transmission since they change the speed ratio continuously. For that reason they are considered an automatic transmission with infinite number of ratios. Variable speed belt drives are commonly used in motorcycles.

ÄHNLICHE VERFÜGBARE GERÄTE

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

WGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

WGCM

Unit to Study a Worm Gear Cutaway Model

It is a worm gear with shafts perpendicular to each other. It consists of a helical worm screw and a circular cogwheel. Some applications of this device are automatic doors or elevators systems, where motion in one direction and blocking the...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

MGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

MGCM

Unit to Study a Mitre Gear Cutaway Model

It is a mitre gear. It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two perpendicular shafts.

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

SGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM

Unit to Study a Spur Gear Cutaway Model

It is a spur gear. This type of gear is the simplest one, normally used for low or medium speeds, since they are noisy if not well-formed.

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

SGCM/2

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM/2

Unit to Study a Two-Stage Spur Gear Cutaway Model

It is a two-stage spur gear. Two-stage gears are used when rotation transmission between shafts cannot be obtained with only one pair of gears.

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

PGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

PGCM

Unit to Study a Planetary Gear Cutaway Model

It is a planetary gear. It consists of one or more external or planet gears that revolves about a central or sun gear. Planetary gears are normally used as reducers in gearboxes or as differentials.

UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM

CGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

CGCM

Unit to Study a Control Gear Cutaway Model

It is a control gear. Its function is to control the space between teeth.

UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM

DCCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

DCCM

Unit to Study a Multiple-Disc Clutch Cutaway Model

It is a multiple-disk clutch. Multiple-disk clutches allow for transmitting higher torques. Such clutches are used in the steering of chain tractors.

UNIT TO STUDY A BEARING CUTAWAY MODEL - BCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

BCM

Unit to Study a Bearing Cutaway Model

It is a pedestal bearing. Bearings are commonly used in industry, their function is to withstand a load while in contact with other body, having relative movement between them.

ERGÄNZENDE AUSRÜSTUNG

CUTAWAY MODELS OF TRANSMISSION OF MOTION UNITS - CMTM

CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

CMTM

Cutaway Models of Transmission of Motion Units

Mechanical transmission is any device that propagates power between two or more elements of a machine. The most common mechanical transmissions are cables, chains, belts, gears, pulleys, friction wheels, friction discs, camshafts,...

WGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

WGCM

Unit to Study a Worm Gear Cutaway Model

MGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

MGCM

Unit to Study a Mitre Gear Cutaway Model

It is a mitre gear. It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two perpendicular shafts.

SGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM

Unit to Study a Spur Gear Cutaway Model

It is a spur gear. This type of gear is the simplest one, normally used for low or medium speeds, since they are noisy if not well-formed.

SGCM/2

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM/2

Unit to Study a Two-Stage Spur Gear Cutaway Model

It is a two-stage spur gear. Two-stage gears are used when rotation transmission between shafts cannot be obtained with only one pair of gears.

PGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

PGCM

Unit to Study a Planetary Gear Cutaway Model

It is a planetary gear. It consists of one or more external or planet gears that revolves about a central or sun gear. Planetary gears are normally used as reducers in gearboxes or as differentials.

CGCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

CGCM

Unit to Study a Control Gear Cutaway Model

It is a control gear. Its function is to control the space between teeth.

DCCM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

DCCM

Unit to Study a Multiple-Disc Clutch Cutaway Model

It is a multiple-disk clutch. Multiple-disk clutches allow for transmitting higher torques. Such clutches are used in the steering of chain tractors.

Available

7.4.1.- ABSCHNITTLICHE MODELLE

BCM

Unit to Study a Bearing Cutaway Model

It is a pedestal bearing. Bearings are commonly used in industry, their function is to withstand a load while in contact with other body, having relative movement between them.

QUALITÄT

KUNDENDIENST

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS