9.10.- INSTALLATIONEN UND WARTUNG

Die Bedürfnisse der heutigen Gesellschaft sind eine Herausforderung für jede Industrie, da sie sich in ständiger Entwicklung und Erneuerung befinden müssen, um sich an diese Bedürfnisse anzupassen.

Mehr sehen

In den letzten Jahren, als Folge der neuen industriellen Revolution oder Industrie 4. 0, dem Aufkommen des Industriellen Internet der Dinge (IIoT) und der Smart Factories, dass die Anpassung dank der Anwendung der ausgeklügeltsten Techniken bei der Konzeption neuer Einrichtungen oder bei der Renovierung bestehender Einrichtungen möglich ist.

Trotz all dieser technologischen Fortschritte und der durchgeführten erschöpfenden Kontrollen darf nicht vergessen werden, dass jedes Element, das am Produktionsprozess beteiligt ist, einer mechanischen und elektrischen Abnutzung (Anstrengungen, Belastungen, etc.) ausgesetzt ist und seine Nutzungsdauer begrenzt ist. Um katastrophale Ausfälle, Produktionsunterbrechungen oder jede Art von Prozess zu vermeiden, die eine Erhöhung der unproduktiven Zeiten und somit eine Kostensteigerung impliziert, ist es äusserst wichtig, eine gute Wartung von Maschinen, elektrischen Systemen, usw.

Traditionell wurden nur zwei Typen von Wartung berücksichtigt:/div>

  • Korrigierend: der Fehler wird gelöst, wenn er bereits aufgetreten ist.
  • Präventiv: periodische Überprüfung all dieser problematischen Elemente und bei Bedarf deren Ersatz.

Diese Arten der Instandhaltung sind in den meisten Fällen mit sehr hohen und unnötigen Kosten verbunden. Heutzutage ist es dank der verfügbaren Technologie möglich, eine vorhersagekräftige Wartung durchzuführen, die aus einer umfassenden Analyse aller Variablen besteht, die an allen Komponenten eines Systems beteiligt sind, und die in der Lage sind, diese zum richtigen Zeitpunkt zu ersetzen.

Wenn man jedoch eine bessere Kontrolle über die Ausfälle bevorzugt, unter denen alle mechanischen Komponenten leiden können, die einem Verschleiß unterliegen, gibt es eine andere Art der Wartung, die als proaktive Wartung bekannt ist. Sie geht einen Schritt weiter als die vorausschauende Wartung und sucht nach der Wurzel des Problems.

Siehe Produkte
INSTALLATIONEN UND WARTUNG UNITS
1 - 30 von 37 Artikel(n)
UNIT TO STUDY A FILTER DRIER  CUTAWAY MODEL - DFCM
  • DFCM
Available
9.10.1.- ABSCHNITTLICHE MODELLE
DFCM
Unit to Study a Filter Drier Cutaway Model
The Unit to Study a Filter Drier Cutaway Model, "DFCM", allows the students to visualize the inner parts of a (element), to evaluate the relation with each other accurately and to understand their functionThe cutaway model of a filter drier is...
UNIT TO STUDY A GAS METER CUTAWAY MODEL - GMCM
  • GMCM
Available
9.10.1.- ABSCHNITTLICHE MODELLE
GMCM
Unit to Study a Gas Meter Cutaway Model
The Unit to Study a Gas Meter Cutaway Model, "GMCM", allows the students to visualize the inner parts of a gas meter, to evaluate the relation with each other accurately and to understand their function.It is a measurement device to determine the...
UNIT TO STUDY A HELICAL OIL SEPARATOR CUTAWAY MODEL - HOSCM
  • HOSCM
Available
9.10.1.- ABSCHNITTLICHE MODELLE
HOSCM
Unit to Study a Helical Oil Separator Cutaway Model
The Unit to Study a Helical Oil Separator Cutaway Model, "HOSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.It is a real model used...
UNIT TO STUDY A LIQUID SEPARATOR CUTAWAY MODEL - LSCM
  • LSCM
Available
9.10.1.- ABSCHNITTLICHE MODELLE
LSCM
Unit to Study a Liquid Separator Cutaway Model
The Unit to Study a Liquid Separator Cutaway Model, "LSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a liquid...
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TIR
Introduction to Refrigeration Unit
The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEMT
Temperature Measurement Training Unit
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR
  • TAMR
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TAMR
Montage- und Wartungsausrüstung für Kälteanlagen
The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration systems.The fully...
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TRAMC/1
Home refrigeration model
Zubehör von TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
SIMPLE AIR CONDITIONING SYSTEM MODEL FOR ROOM COOLING - TRAMC/3
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TRAMC/3
Simple Air Conditioning System Model for Room Cooling
Zubehör von TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TRAMC/4
Complete Air Conditioning System Model
Zubehör von TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
MEASUREMENT AND REGULATION STATION UNIT - MRST
  • MRST
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
MRST
Measurement and Regulation Station Unit
The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit. The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
INSTANTANEOUS GAS HEATER EXPERIMENTATION UNIT - IGHT
  • IGHT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
IGHT
Instantaneous Gas Heater Experimentation Unit
The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
FORCED DRAFT GAS BURNER UNIT - GBT
  • GBT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
GBT
Forced Draft Gas Burner Unit
The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
GAS HOME SUPPLY TRAINER - GHST
  • GHST
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
GHST
Gas Home Supply Trainer
The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation. The unit works with air,...
ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR
  • TEIR
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEIR
Electrical Installations in Refrigeration Systems Unit
For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...
ELECTRICAL CONNECTION OF REFRIGERANT COMPRESSORS UNIT - TECR
  • TECR
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TECR
Electrical Connection of Refrigerant Compressors Unit
The Electrical Connection of Refrigerant Compressors Unit, "TECR", includes the electrical elements required for the start and operation of a refrigerant compressor and the necessary safety elements, arranged on a panel in a clear and visible way,...
ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA
  • TEFA
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEFA
Electrical Faults in Air Conditioning Systems Unit
The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...
HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
THBT
Hydraulic Radiator Balancing Training Unit
The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
RT
Radiators Training Unit
The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
THST
Heating System Training Unit
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEV3V
Three-Way Mixing Valve Training Unit
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEV4V
Four-Way Mixing Valve Training Unit
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEIS
Sanitary Fittings Training Unit
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
Informationen anfordern