AE-PLC-CP Control Processes Workstation

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

INNOVATIVE SYSTEME

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes.

Allgemeine Beschreibung anzeigen

ALLGEMEINE BESCHREIBUNG

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes.

The "AE-PLC-CP" workstation has been designed as a modular system to facilitate the understanding of the equipment operation:

  • The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
  • The control panel: emergency stop push button switch, start/stop button, reset button, light indicator to show the state of the workstation, etc.
  • The pneumatic circuit: contains the required such as solenoid valves, air filters, air regulators, etc. to assure the appropriate operation of the workstation.
  • The workstation: is composed by real components used by the industrial processes controllers systems such as: industrial controllers, pumping system, pressure sensors, temperature sensors, etc.

The "AE-PLC-CP" workstation that can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at the "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

ÜBUNGEN UND GEFÜHRTE PRAKTIKEN

GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to pneumatics and electro-pneumatics.
  3. Study of the sensor detection.
  4. Manual control of tank level.
  5. Automatic control of tank level with industrial controllers.
  6. Manual control of temperature.
  7. Automatic control of temperature with industrial controllers.
  8. Manual control of tank pressure.
  9. Automatic control of tank pressure with industrial controllers.
  10. Manual control of flow rate.
  11. Automatic control of flow rate with industrial controllers.
  12. Study of a complete automatic process control workstation.
  13. Study the faults inserted in the process with the fault generation module.

ERFORDERLICHE ELEMENTE

ZUSÄTZLICHE EMPFOHLENE ELEMENTE

ÄHNLICHE VERFÜGBARE GERÄTE

QUALITÄT

KUNDENDIENST