8.1.- 流体力学模块化实验室

水力学是研究流体机械特性的科学分支,流体力学是水力学的基础。EDIBON试图以简单实用的方式,对流体力学基础教学的学术需求给出一个答案。为此,它有一个灵活的、模块化的基础流体力学学习体系。

查看更多

通过提出的一系列模块,学生进行实验,清晰地展示了水力学的规律。通过这些实验,学生在自然、愉快、朴实的过程中获得使用液压仪器和工具的经验。

通过流体力学实验室所包含的设备,学生可以进行流体的表征、流体流动的测量和控制,研究流体力学的主要现象和原理,了解工业上广泛使用的设备的表示方法。

查看产品
流体力学模块化实验室 UNITS
Showing 1-30 of 45 item(s)
BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA
  • LIFLUBA
Available
8.1.7.- 液压机: 涡轮机
LIFLUBA
基本流体力学综合实验室:
Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...
HYDRAULICS BENCH - FME00
Available
8.1.1.- 基本单位
FME00
液压工作台
配件 LIFLUBA
The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...
BASIC HYDRAULIC FEED SYSTEM - FME00/B
Available
8.1.1.- 基本单位
FME00/B
基本的液压进给系统
配件 LIFLUBA
The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.
FLOW OVER WEIRS - FME02
Available
8.1.2.- 测量
FME02
堰过流
配件 LIFLUBA
The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...
DEAD WEIGHT CALIBRATOR - FME10
Available
8.1.2.- 测量
FME10
静重校准
配件 LIFLUBA
The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis...
FLOWMETER CALIBRATOR - FME37
Available
8.1.2.- 测量
FME37
流量计校准器
配件 LIFLUBA
The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...
FLOW METER DEMONSTRATION - FME18
Available
8.1.2.- 测量
FME18
流量计示范
配件 LIFLUBA
The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...
DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26
Available
8.1.2.- 测量
FME26
泄压测量系统(真空计)
配件 LIFLUBA
The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...
TRANSPARENT VORTEX FLOW METER - FME30
Available
8.1.2.- 测量
FME30
旋涡流量计
配件 LIFLUBA
The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...
VORTEX FLOW METER - FME30/I
Available
8.1.2.- 测量
FME30/I
Vortex Flow Meter
配件 LIFLUBA
The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...
STATIC PITOT TUBE - FME32
Available
8.1.2.- 测量
FME32
静态皮托管
配件 LIFLUBA
The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...
FLUID STATICS AND MANOMETRY - FME34
Available
8.1.2.- 测量
FME34
流体静力学和测压
配件 LIFLUBA
The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...
ROTAMETER - FME36
Available
8.1.2.- 测量
FME36
Rotameter
配件 LIFLUBA
The Rotameter, "FME36", designed by EDIBON, is a variable area flowmeter with floater. This type of flowmeter can be used for flow measurements in almost any environment.The operation mode of this type of flowmeter is based on the fact that if a...
HYDRAULIC RAM PUMP - FME38
Available
8.1.6.- 液压机: 泵
FME38
水力拉姆泵
配件 LIFLUBA
The Hydraulic Ram Pump, "FME38", designed by EDIBON, utilizes the water hammer effect to raise water to a higher level than its power source. It operates by harnessing the rapid change in water velocity in a pipe that occurs when its flow is...
DATA ACQUISITION SYSTEM AND SENSORS - BDAS
Available
8.1.7.- 液压机: 涡轮机
BDAS
Data Acquisition System and Sensors
配件 LIFLUBA
BDAS is designed to monitor the measurements of each unit type "FME" from a computer (PC).This system can monitor any unit, checking the revolutions given by the water pump or the torque, differential pressures for Bernoulli theorems, pressure...
HYDROSTATIC PRESSURE - FME08
Available
8.1.3.- 静水的
FME08
静水压力
配件 LIFLUBA
The Surface Pressure Unit, "FME08", designed by EDIBON, allows to study the center of pressures with a partially or totally submerged quadrant.This unit consists of a quadrant mounted on the arm of a balance that pivots around an axis.When the...
METACENTRIC HEIGHT DEMOSTRATION - FME11
Available
8.1.3.- 静水的
FME11
稳心高度
配件 LIFLUBA
The Metacentric Height Demonstration Unit, "FME11", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height.The unit consists of a floating methacrylate prismatic base, on which a vertical...
METACENTRIC HEIGHT DEMOSTRATION OF A "V" SHAPED FLOATING BODY - FME11-A
Available
8.1.3.- 静水的
FME11-A
V "型浮动物体的元心高度演示
配件 LIFLUBA
The Metacentric Height Demostration of a "V" Shaped Floating Object, "FME11-A", designed by EDIBON, allows the study of the stability of a floating object by calculating the metacentric height of a floating object starting from a V-shaped floating...
METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B
Available
8.1.3.- 静水的
FME11-B
U 形漂浮物的元心高度演示
配件 LIFLUBA
The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...
PASCAL'S PRINCIPLE DEMONSTRATION - FME33
Available
8.1.3.- 静水的
FME33
帕斯卡尔原理演示
配件 LIFLUBA
The Pascal's Principle Demonstration Unit, "FME33", designed by EDIBON, allows to demonstrate Pascal's principle, i.e. that the pressure in an incompressible fluid is independent of the column size section but depends only on its height (liquid...
FLUID PROPERTIES - FME35
Available
8.1.3.- 静水的
FME35
流体性质
配件 LIFLUBA
The Fluid Properties Unit, "FME35", designed by EDIBON, allows the study of the fluids fundamental properties that affect their behavior in practical applications.We can study capillarity, density and relative density (specific gravity), buoyancy...
JET IMPACT ON SURFACES - FME01
Available
8.1.4.- 静水的
FME01
射流对表面的影响
配件 LIFLUBA
The unit consists of a cylindrical tank with lateral transparent surfaces where a nozzle, connected to the Hydraulics Bench (FME00), is aligned with a device in which the problem surface is fitted. The vertical force made by the water against the...
BERNOULLI'S THEOREM DEMONSTRATION - FME03
Available
8.1.4.- 静水的
FME03
伯努利定理示范
配件 LIFLUBA
The Bernoulli's Theorem Demonstration unit, "FME03", designed by EDIBON is mainly composed of a circular section pipe with the shape of a truncated cone, transparent and with seven pressure taps that allows to measure, simultaneously, the static...
ORIFICE DISCHARGE - FME04
Available
8.1.4.- 静水的
FME04
孔板放电
配件 LIFLUBA
The Orifice Discharge Unit, "FME04", designed by EDIBON allows the study of the different concentration, discharge and velocity coefficients for thin and/or thick wall for different types: colloidal, Venturi or diaphragm.The unit consists of a...
FREE AND FORCED VORTEX - FME14
Available
8.1.4.- 静水的
FME14
自由涡与强制涡
配件 LIFLUBA
The Forced and Free Vortex unit, "FME14", designed by EDIBON, allows the study of the fluid rotation in relation to an axis and the study of circular flow at changing velocities.The unit has a cylindrical and transparent deposit with two inlet...
ORIFICE AND FREE JET FLOW - FME17
Available
8.1.4.- 静水的
FME17
孔板与自由射流
配件 LIFLUBA
The Orifice and Free Jet Flow unit, "FME17", designed by EDIBON, allows the study of the different discharge and velocity coefficients in permanent or variable regime as well as the calculation of the discharge times.The unit consists of a...
CAVITATION PHENOMENON DEMONSTRATION - FME19
Available
8.1.4.- 静水的
FME19
气蚀现象演示
配件 LIFLUBA
The Cavitation Phenomenon Demonstration unit, "FME19", designed by EDIBON is composed of a Venturi tube with a rectangular cross section, one of its sides being transparent, allowing a better visualization of the cavitation phenomenon.It includes...
OSBORNE REYNOLDS' DEMONSTRATION - FME06
Available
8.1.5.- 流量显示
FME06
奥斯本雷诺兹演示
配件 LIFLUBA
The Osborne Reynolds Demonstration Unit, "FME06", designed by EDIBON, consists of a cylindrical tank endowed with a nozzle, that is fitted to a methacrylate pipe, which allows the fluid visualization.A spillway guarantees the homogeneity of the...
FLOW VISUALIZATION IN CHANNELS - FME09
Available
8.1.5.- 流量显示
FME09
流动可视化渠道
配件 LIFLUBA
The Flow Visualization in Channels unit, "FME09", designed by EDIBON, allows the visualization of liquid spillage phenomena in weirs and the study of objects submerged in a fluid stream (aerodynamics).The unit consists of a transparent...
要求信息