HMM-W500 U-образный двойной манометр

ИННОВАЦИОННЫЕ СИСТЕМЫ

With the U-Shape Double Manometer, "HMM-W500," designed by EDIBON, the study of different pressures is facilitated for operation with the Pitot tube. The U-Shape Double Manometer allows finding the pressure between two points or two fluids.

Посмотреть общее описание

Каталог

Спецификации конкурса

НОВОСТИ ПО ТЕМЕ

ОБЩЕЕ ОПИСАНИЕ

The pressure is determined by measuring the difference in the liquid level between the two paths.

АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ

INCLINED MULTIMANOMETER WITH 20 MANOMETRIC TUBES OF 250 MM LENGTH - HMM-I1000

HMM-I1000

Available

8.2.- ИЗМЕРЕНИЕ

HMM-I1000

Наклонный манометр с 20 манометрическими трубками длиной 250 мм

The Inclined Multimanometer with 20 manometric tubes of 250 mm length, "HMM-I1000," designed by EDIBON, allows measuring and comparing pressures at different points or fluids simultaneously.This facilitates the detailed analysis of pressure...

MULTIMANOMETER WITH 8 MANOMETRIC TUBES OF 500 MM LENGTH, VERTICAL POSITION - HMM-V500

HMM-V500

Available

8.2.- ИЗМЕРЕНИЕ

HMM-V500

Мультиманометр с 8 манометрическими трубками длинной 500 мм вертикального расположения

Vertical Multimanometer (8 Manometric Tubes, 500 mm in Length), "HMM-V500," designed by EDIBON, is a multimanometer designed to accurately measure and analyze pressure variations in vertical configurations. It provides valuable data to understand...

HMM-U1000

Available

8.2.- ИЗМЕРЕНИЕ

HMM-U1000

U-образный Манометр

The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...

HMM-4B

Available

8.2.- ИЗМЕРЕНИЕ

HMM-4B

Установка из 4 манометрических трубок Бурдона

The 4 Bourdon type Manometers Unit, "HMM-4B," designed by EDIBON, stands out for incorporating Bourdon-type gauges for precise pressure measurements in fluid systems.This unit enables a detailed analysis of pressure variations at multiple points...

MULTIMANOMETER WITH 12 MANOMETRIC TUBES OF 500 MM LENGHT, VERTICAL POSITION - HMM-V500-12

HMM-V500-12

Available

8.2.- ИЗМЕРЕНИЕ

HMM-V500-12

Мультиманометр с 12-ю манометрическими трубками длиной 500 мм вертикального положения

One type of gauge is a U-shaped gauge, which balances the unknown pressure with a known pressure. The pressure is determined by measuring the difference in liquid level of the two branches. Most of these gauges can be used as open gauges or as...

ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ

FMDU

Available

8.2.- ИЗМЕРЕНИЕ

FMDU

Демонстрационное оборудование для измерения расхода

The Flow Meters Demonstration Unit, "FMDU", designed by EDIBON demonstrates the important characteristics of fifteen types of flow meters used in the measurement of water flow through pipes or open channels.The main elements are a service module...

HEMP

Available

8.2.- ИЗМЕРЕНИЕ

HEMP

Устройство для измерения давления

The Pressure Measurement Unit, "HEMP", enables a wide range of investigations and studies into pressure measurement techniques, using Bourdon type manometers and different U-tube manometers, to understand the operation, the characteristics of the...

DROP BALL VISCOMETER AND RESISTANCE COEFFICIENT DETERMINATION UNIT - HVB

Available

8.2.- ИЗМЕРЕНИЕ

HVB

Вискозиметр с падающим шаром и определением коэффициента сопротивления

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be filled with liquids...

PRECISION PRESSURE GAUGE CALIBRATOR - HCMP

HCMP

Available

8.2.- ИЗМЕРЕНИЕ

HCMP

Калибратор для прецизионного манометра

The Precision Pressure Gauge Calibrator, "HCMP", is a self-contained and portable dead weight precision pressure gauge calibrator.The unit allows the calibration of pressure gauges up to 300 bar. Calibration is accurate within ± 0.015 % of...

PRESSURE MEASUREMENT AND CALIBRATION UNIT - TMCP

TMCP

Available

8.2.- ИЗМЕРЕНИЕ

TMCP

Устройство калибровки и измерения давления

The Pressure Measurement and Calibration Unit, "TMCP", has been designed to study the concept of pressure and the different methods and techniques used to measure this variable.The dead-weight calibrator consists of a cylinder in which interior a...

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- ИНСТРУМЕНТАРИЙ И КОНТРОЛЬ

SCSP

Система калибровки датчиков давления

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

MANOMETERS & MULTIMANOMETERS (SEVERAL TYPES): - HMM

Available

8.2.- ИЗМЕРЕНИЕ

HMM

Манометры и мультиманометры (несколько видов):

Thanks to the "Manometer and Multimanometer, "HMM" collection designed by EDIBON, a comprehensive and versatile solution is provided with a wide variety of manometers tailored to specific pressure measurement needs. This collection ensures safe...