9.10.- 설치 및 유지 관리

오늘날 사회의 요구는 모든 산업에 대한 도전입니다. 왜냐하면 그것들에 적응하려면 지속적으로 진화하고 갱신해야하기 때문입니다.

더보기

최근 몇 년 동안 새로운 산업 혁명 또는 "인더스트리 4.0"의 결과, "산업용 사물 인터넷"(IIoT) 및 "스마트 팩토리"의 등장으로 기술의 적용 덕분에 이러한 요구에 적응할 수 있습니다. 기존 시설의 리노베이션에서 새로운 시설의 설계에서 더 정교합니다.

이러한 모든 기술 발전과 철저한 제어에도 불구하고 생산 공정에 개입하는 모든 요소가 기계적 및 전기적 마모 (노력, 부하 등)의 영향을 받는다는 사실을 잊지 말아야합니다. 그것의 유효 수명이 제한됩니다. 치명적인 고장, 생산 중단 또는 비 생산 시간의 증가와 그에 따른 비용 증가를 의미하는 모든 유형의 프로세스를 방지하려면 기계, 전기 시스템 등을 잘 유지 관리하는 것이 매우 중요합니다.

전통적으로 두 가지 유형의 유지 관리 만 고려되었습니다.

  • 수정 : 이미 발생한 오류를 해결하는 것으로 구성됩니다.
  • 예방 : 문제가되는 모든 요소를 ​​주기적으로 검토하고 고려 된 경우이를 교체하는 것으로 구성됩니다.

이러한 유형의 유지 관리에는 대부분의 경우 매우 높고 불필요한 비용이 포함됩니다. 현재 사용 가능한 기술 덕분에 시스템의 모든 구성 요소에 개입하는 모든 변수에 대한 철저한 분석으로 구성된 예측 유지 관리를 수행하고 정확한 순간에이를 교체 할 수 있습니다.

그러나 마모되는 모든 기계 구성 요소가 겪을 수있는 고장을 더 잘 제어하려면 사전 예방 적 유지 관리라고하는 또 다른 유형의 유지 관리가 있습니다.이 유지 관리는 예측 한 단계를 넘어서 문제의 원인을 찾는 것으로 구성됩니다.

제품보기
설치 및 유지 관리 UNITS
Showing 1-30 of 37 item(s)
UNIT TO STUDY A FILTER DRIER  CUTAWAY MODEL - DFCM
  • DFCM
Available
9.10.1.- 섹션 모델
DFCM
Unit to Study a Filter Drier Cutaway Model
The Unit to Study a Filter Drier Cutaway Model, "DFCM", allows the students to visualize the inner parts of a (element), to evaluate the relation with each other accurately and to understand their functionThe cutaway model of a filter drier is...
UNIT TO STUDY A GAS METER CUTAWAY MODEL - GMCM
  • GMCM
Available
9.10.1.- 섹션 모델
GMCM
Unit to Study a Gas Meter Cutaway Model
The Unit to Study a Gas Meter Cutaway Model, "GMCM", allows the students to visualize the inner parts of a gas meter, to evaluate the relation with each other accurately and to understand their function.It is a measurement device to determine the...
UNIT TO STUDY A HELICAL OIL SEPARATOR CUTAWAY MODEL - HOSCM
  • HOSCM
Available
9.10.1.- 섹션 모델
HOSCM
Unit to Study a Helical Oil Separator Cutaway Model
The Unit to Study a Helical Oil Separator Cutaway Model, "HOSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.It is a real model used...
UNIT TO STUDY A LIQUID SEPARATOR CUTAWAY MODEL - LSCM
  • LSCM
Available
9.10.1.- 섹션 모델
LSCM
Unit to Study a Liquid Separator Cutaway Model
The Unit to Study a Liquid Separator Cutaway Model, "LSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a liquid...
UNIT TO STUDY AN OPEN REFRIGERANT COMPRESSOR CUTAWAY MODEL - OCCM
  • OCCM
Available
9.10.1.- 섹션 모델
OCCM
Unit to Study an Open Refrigerant Compressor Cutaway Model
The Unit to Study an Open Refrigerant Compressor Cutaway Model, "HCCM", allows the students to visualize the inner parts of an open compressor, to evaluate the relation with each other accurately and to understand their function.This unit allows...
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- 설치 및 유지 관리 관행
TIR
Introduction to Refrigeration Unit
The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- 설치 및 유지 관리 관행
TEMT
Temperature Measurement Training Unit
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR
  • TAMR
Available
9.10.3.- 설치 및 유지 관리 관행
TAMR
냉동 설비 조립 및 유지 보수 장비
The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration systems.The fully...
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- 설치 및 유지 관리 관행
TRAMC/1
Home refrigeration model
액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
SIMPLE AIR CONDITIONING SYSTEM MODEL FOR ROOM COOLING - TRAMC/3
Available
9.10.3.- 설치 및 유지 관리 관행
TRAMC/3
Simple Air Conditioning System Model for Room Cooling
액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- 설치 및 유지 관리 관행
TRAMC/4
Complete Air Conditioning System Model
액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
MEASUREMENT AND REGULATION STATION UNIT - MRST
  • MRST
Available
9.10.3.- 설치 및 유지 관리 관행
MRST
Measurement and Regulation Station Unit
The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit. The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
INSTANTANEOUS GAS HEATER EXPERIMENTATION UNIT - IGHT
  • IGHT
Available
9.10.3.- 설치 및 유지 관리 관행
IGHT
Instantaneous Gas Heater Experimentation Unit
The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
FORCED DRAFT GAS BURNER UNIT - GBT
  • GBT
Available
9.10.3.- 설치 및 유지 관리 관행
GBT
Forced Draft Gas Burner Unit
The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
GAS HOME SUPPLY TRAINER - GHST
  • GHST
Available
9.10.3.- 설치 및 유지 관리 관행
GHST
Gas Home Supply Trainer
The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation. The unit works with air,...
ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR
  • TEIR
Available
9.10.3.- 설치 및 유지 관리 관행
TEIR
Electrical Installations in Refrigeration Systems Unit
For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...
ELECTRICAL CONNECTION OF REFRIGERANT COMPRESSORS UNIT - TECR
  • TECR
Available
9.10.3.- 설치 및 유지 관리 관행
TECR
Electrical Connection of Refrigerant Compressors Unit
The Electrical Connection of Refrigerant Compressors Unit, "TECR", includes the electrical elements required for the start and operation of a refrigerant compressor and the necessary safety elements, arranged on a panel in a clear and visible way,...
ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA
  • TEFA
Available
9.10.3.- 설치 및 유지 관리 관행
TEFA
Electrical Faults in Air Conditioning Systems Unit
The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...
HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- 설치 및 유지 관리 관행
THBT
Hydraulic Radiator Balancing Training Unit
The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- 설치 및 유지 관리 관행
RT
Radiators Training Unit
The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- 설치 및 유지 관리 관행
THST
Heating System Training Unit
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- 설치 및 유지 관리 관행
TEV3V
Three-Way Mixing Valve Training Unit
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- 설치 및 유지 관리 관행
TEV4V
Four-Way Mixing Valve Training Unit
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- 설치 및 유지 관리 관행
TEIS
Sanitary Fittings Training Unit
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
정보 요청