8.9.- 설치 및 유지 관리

오늘날 사회의 요구는 모든 산업에 대한 도전입니다. 왜냐하면 그것들에 적응하려면 지속적으로 진화하고 갱신해야하기 때문입니다.

더보기

최근 몇 년 동안 새로운 산업 혁명 또는 "인더스트리 4.0"의 결과, "산업용 사물 인터넷"(IIoT) 및 "스마트 팩토리"의 등장으로 기술의 적용 덕분에 이러한 요구에 적응할 수 있습니다. 기존 시설의 리노베이션에서 새로운 시설의 설계에서 더 정교합니다.

이러한 모든 기술 발전과 철저한 제어에도 불구하고 생산 공정에 개입하는 모든 요소가 기계적 및 전기적 마모 (노력, 부하 등)의 영향을 받는다는 사실을 잊지 말아야합니다. 그것의 유효 수명이 제한됩니다. 치명적인 고장, 생산 중단 또는 비 생산 시간의 증가와 그에 따른 비용 증가를 의미하는 모든 유형의 프로세스를 방지하려면 기계, 전기 시스템 등을 잘 유지 관리하는 것이 매우 중요합니다.

전통적으로 두 가지 유형의 유지 관리 만 고려되었습니다.

  • 수정 : 이미 발생한 오류를 해결하는 것으로 구성됩니다.
  • 예방 : 문제가되는 모든 요소를 ​​주기적으로 검토하고 고려 된 경우이를 교체하는 것으로 구성됩니다.

이러한 유형의 유지 관리에는 대부분의 경우 매우 높고 불필요한 비용이 포함됩니다. 현재 사용 가능한 기술 덕분에 시스템의 모든 구성 요소에 개입하는 모든 변수에 대한 철저한 분석으로 구성된 예측 유지 관리를 수행하고 정확한 순간에이를 교체 할 수 있습니다.

그러나 마모되는 모든 기계 구성 요소가 겪을 수있는 고장을 더 잘 제어하려면 사전 예방 적 유지 관리라고하는 또 다른 유형의 유지 관리가 있습니다.이 유지 관리는 예측 한 단계를 넘어서 문제의 원인을 찾는 것으로 구성됩니다.

제품보기
설치 및 유지 관리 UNITS
Showing 1-30 of 32 item(s)
UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM
  • ANVCM
Available
8.9.1.- 섹션 모델
ANVCM
Unit to Study an Angular Needle Valve Cutaway Model
The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- 섹션 모델
BVCM
Unit to Study a Ball Valve Cutaway Model
The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM
  • LNVCM
Available
8.9.1.- 섹션 모델
LNVCM
Unit to Study a Lift Non-return Valve Cutaway Model
The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...
UNIT TO STUDY A NON-RETURN BUTTERFLY VALVE CUTAWAY MODEL - NBVCM
  • NBVCM
Available
8.9.1.- 섹션 모델
NBVCM
Unit to Study a Non-return Butterfly Valve Cutaway Model
The Unit to Study a Non-Return Butterfly Valve Cutaway Model, "NBVCM", allows the students to visualize the inner parts of a butterfly valve, to evaluate the relation with each other accurately and to understand their function.It is a valve to...
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- 섹션 모델
PMFCM
Unit to Study a Pipe Mesh Filter Cutaway Model
The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
UNIT TO STUDY A STRAIGHT-WAY NEEDLE VALVE CUTAWAY MODEL - SNVCM
  • SNVCM
Available
8.9.1.- 섹션 모델
SNVCM
Unit to Study a Straight-way Needle Valve Cutaway Model
The Unit to Study a Straight-Way Needle Valve Cutaway Model, "SNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with...
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- 섹션 모델
WMCM
Unit to Study a Water Meter Cutaway Model
The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM
  • UHCM
Available
8.9.1.- 섹션 모델
UHCM
Unit to Study an Underground Hydrant Cutaway Model
The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...
CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM
  • CPCM
Available
8.9.1.- 섹션 모델
CPCM
원심 펌프 모델 절단 장치
The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
GEAR PUMP CUTAWAY MODEL UNIT - GPCM
  • GPCM
Available
8.9.1.- 섹션 모델
GPCM
Gear Pump Cutaway Model Unit
The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
PISTON PUMP CUTAWAY MODEL UNIT - PPCM
  • PPCM
Available
8.9.1.- 섹션 모델
PPCM
Piston Pump Cutaway Model Unit
The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- 분리 가능한 모델
ASV
닫힘 밸브 조립 장비
The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- 분리 가능한 모델
AMCV
모터 제어 밸브 조립 장비
The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- 분리 가능한 모델
ACPV
에어 밸브 조립 장비
The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- 분리 가능한 모델
AMP
Assembly and Maintenance of Pumps
The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMCP
원심 펌프 조립 및 유지 보수 장비
액세서리 AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...
ASSEMBLY AND MAINTENANCE OF A MULTISTAGE CENTRIFUGAL PUMP UNIT - AMMCP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMMCP
다단 원심 펌프 조립 및 유지 보수 장비
액세서리 AMP
The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMSP
스크류 펌프 조립 및 유지 보수 장비
액세서리 AMP
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMDP
다이어프램 펌프 조립 및 유지 보수 장비
액세서리 AMP
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMPP
피스톤 펌프 조립 및 유지 보수 장비
액세서리 AMP
The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...
ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMLCP
인라인 원심 펌프 조립 및 유지 보수 장비
액세서리 AMP
The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...
ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMGP
기어 펌프 조립 및 유지 보수 장비
액세서리 AMP
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...
PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA
  • PVFA
Available
8.9.3.- 설치 및 유지 관리 관행
PVFA
파이프, 밸브 및 부속품 조립 장비
The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...
BACKFLOW PREVENTION TRAINING UNIT - BFPT
  • BFPT
Available
8.9.3.- 설치 및 유지 관리 관행
BFPT
Backflow Prevention Training Unit
The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- 설치 및 유지 관리 관행
TEV3V
Three-Way Mixing Valve Training Unit
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- 설치 및 유지 관리 관행
TEV4V
Four-Way Mixing Valve Training Unit
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- 설치 및 유지 관리 관행
TEIS
Sanitary Fittings Training Unit
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- 설치 및 유지 관리 관행
TIAP
Drinking Water Installation Unit
The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- 설치 및 유지 관리 관행
TPAP
Protection of Drinking Water Training Unit
The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- 설치 및 유지 관리 관행
TELT
Pipe Cleaning Training Unit
The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
정보 요청